Primera Technology specifications Ii CX1200 Color Label Press

Page 2

Notices: The information in this document is subject to change without notice. NO WARRANTY OF ANY KIND IS MADE WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No liability is assumed for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent.

Trademark Acknowledgments: Windows is a registered trademark of Microsoft Corporation. All other trademarks are the property of their respective owners.

Printing History

Edition 1.4, #093011, Copyright 2011, All rights reserved.

FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For Users in the United States: This product is intended to be supplied by a UL listed Direct Plug-In Power Supply marked "Class 2"or a UL listed ITE Power Supply marked "LPS" with output rated 12VDC, 4.5A or higher. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Re-orient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cables is required to comply with the Class A limits of Part 15 of the FCC Rules. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate and/or obtain warranty service for this equipment.

For Users in Canada: This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the Radio Interference Regulations of the Canadian Department of Communications. Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de la class A prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des Communications du Canada.

General Safety Information.

Note: Notes are used to notify of installation,operation, or maintenance information that is important but not safety related.

Caution: Caution is used to indicate the presence of a hazard, which if ignored may result in damage to the unit.

Warning: Warning means that a potential safety hazard exists and indicates procedures that must be followed exactly to avoid serious personal injury.

Caution

You must use only 8.5 inch wide label stock in the CX1200. Failure to use specified label stock will result in damage to your printer and excessive build up of toner inside the printer.

Caution

You can not use die cut label stock in the CX1200. The extreme heat produced by the fuser will cause the die cut labels to peel off the label backing and get jammed inside the printer. Also, the printer is not designed to line up print images with the specific locations of the die cut labels.

!WARNING!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE EXTERIOR PANELS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. OPERATE THE UNIT WITH ONLY THE PROPER ELECTRICAL SPECIFICATIONS AS LABELED ON THE PRINTER AND AC ADAPTER.

!WARNING!

DO NOT WEAR LOOSE FITTING CLOTHING SUCH AS NECK TIES OR LOOSE LONG SLEEVES WHEN OPERATING THE CX1200. THE REWINDER MOTOR IS VERY POWERFUL AND THE ROLLER COULD CATCH THE CLOTHING WHILE THE ROLL IS BEING REWOUND.

!WARNING!

TO PREVENT SERIOUS INJURY YOU MUST BOLT THE CX1200 TO A TABLE OR BENCH. USE THE INCLUDED LAG BOLTS AND PREDRILLED HOLES IN THE BASE.

!WARNING!

ALL LABEL STOCK MUST BE QUALIFIED FOR LASER PRINTING. PLASTIC BASED STOCKS SUCH POLYPROPYLENE OR POLYESTER CAN MELT OR CATCH FIRE FROM THE EXTREME HEAT OF THE FUSER

ii CX1200 Color Label Press

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operator’s Guide Ii CX1200 Color Label Press Table of Contents Iv CX1200 Color Label Press Introduction Unpack and Assemble Remove65.5 Kg 140 lbs Unwinder Chuck Rewinder Chuck Left Side Right Side Kg lbs Inches 63.5 mm Important Note Do not touch the exposed ITU TOC Index TOC Index Congratulations! Your CX1200 is setup Install Software Load Label Stock Dancer Arm Cutter Tension Knob TOC Index TOC Index Tensioning Unit Potentiometer Create a Print File Array images with PTPrint WizardTOC Index TOC Index TOC Index TOC Index Manually array images using PTPrint TOC Index Creating Cut Files in PTPrint PLT Import Die LineTOC Index Fill = Fxcut Outline = Transparent Die Cut TOC Index Contour Cut TOC Index TOC Index Cut Settings Label Layout Design Tips Tool OptionsUsing Barcodes Recommended Image format for imported Graphics Toner Monitoring and Supplies Management Estimating Cost Per Label Quote ToolPrinting a Proof Print Labels PerManaging Used Toner Cartridges Low Supplies Warning How to use a toner LibraryEnter Supply Roll Length Other functions of the Status Monitor Media Recommendations Paper TypeOther Warnings Replace Toner Cartridges Troubleshooting and Maintenance Matching Pantone ColorsRecommended Design Procedures Color/Alignment Calibration Print Head AlignmentUse the value closest To the straight line Cut Alignment / Stretch Factor Tip Use a clear acrylic ruler to measure the lines Error Messages Stop/Cut buttonReplacing the Fuser Replacing the Image Transfer Unit TOC Index Technical Support Specifications TOC Index Index Page Page 511222

CX1200 specifications

The Primera Technology CX1200 is a cutting-edge digital color label printer designed for businesses that require high-quality labels quickly and efficiently. This versatile printer is ideal for a range of applications, including product labeling, barcode printing, and promotional materials. With its advanced technology and impressive performance, the CX1200 stands out in the competitive landscape of label printing solutions.

One of the main features of the CX1200 is its state-of-the-art print head technology. It is equipped with an industrial-grade print head that uses a high-resolution printing process to produce labels with stunning detail and vibrant colors. The printer supports a maximum resolution of 4800 dpi, ensuring that even the smallest text and intricate designs are clear and legible.

The CX1200 utilizes high-capacity ink cartridges, which help reduce the frequency of replacements and minimize printing costs. It employs Primera’s proprietary pigment-based inks, known for their durability and resistance to smudging and fading. This ensures that labels maintain their sharp appearance, even when exposed to harsh conditions such as moisture and UV light.

In addition to its printing capabilities, the CX1200 offers versatility in terms of label materials. It can print on a wide range of label stocks, including matte, gloss, and synthetic materials. This flexibility allows businesses to create custom labels that suit their specific needs, whether for food and beverage products, cosmetics, or industrial applications.

Another significant advantage of the CX1200 is its user-friendly design. The printer features a simple interface with intuitive controls, making it easy for operators to navigate through various settings and start their print jobs quickly. The compact footprint of the printer also allows it to fit seamlessly into any workspace, making it an excellent choice for small to medium-sized businesses.

The CX1200 integrates easily with popular design software, enabling users to create unique label designs that align with their branding requirements. The printer is compatible with both Windows and macOS platforms, ensuring accessibility for a wide range of users.

In summary, the Primera Technology CX1200 is a powerful digital label printer that combines advanced printing technology with user-friendly features and versatile material compatibility. With its high-resolution output, durable inks, and ease of use, the CX1200 is an excellent investment for businesses looking to enhance their labeling capabilities and streamline their production processes. This printer empowers users to produce professional-quality labels quickly and efficiently, catering to diverse labeling needs across various industries.
Top Page Image Contents