Nortel Networks 553-3901-200 instruction manual Connect the Isdn BRI terminals to the DSL

Page 35

Install ISDN BRI hardware Page 35 of 46

Connect the ISDN BRI terminals to the DSL

ISDN BRI terminals are connected to DSLs using modular cables up to 10 meters (33 feet) long, with RJ-45 plugs on each end. One end of the cable plugs into the terminal and the other end plugs into the wall outlet.

Note: All ISDN BRI terminals should comply with CCITT, ANSI, ETSI NET-3, INS NET-64, National ISDN, 1TR6, Numeris VN2, and D70 standards for terminals, and be compatible with Meridian 1. For a list of compatible terminals, refer to the ISDN Basic Rate Interface: Product Description (553-3901-100).

Figure 9 illustrates a terminal connection to the S/T interface; Figure 10 illustrates a network termination (NT1) connection to the U interface.

1Plug one end of the modular cable into the ISDN BRI interface connector on the terminal, and the other end of the modular cable into the wall outlet.

2For an SILC S/T interface terminal with an optional auxiliary power source, plug the power source into the wall outlet, then plug the cable into the power source's RJ-45 jack. This power source must supply power only to the local ISDN BRI terminal, not back into the DSL through the RJ-45 wall outlet. The power adapter is supplied with the terminal.

3Program the terminal parameters, such as the SPID and TEI, as required by the type of terminal. For detailed information pertaining to this procedure, refer to the section “Initialize ISDN BRI terminals”, found in ISDN Basic Rate Interface: Administration (553-3901-300).

4Repeat steps 1 and 3 for each terminal to be connected.

—————————— End of Procedure ——————————

Connect the terminating resistors

DSLs require that a terminating resistor (Part Number A0378866) be connected at the end of each loop. See ISDN Basic Rate Interface: Product Description (553-3901-100),for engineering rules and locations of terminating resistors. The end of the S/T interface loop has a RJ-45 jack to plug in the telephone cable. Plug the terminating resistor into the RJ-45 and then plug the telephone cable into the terminating resistor. Note that for every port there is one loop with only one terminating resistor per loop. Each loop may have up to eight telephones.

ISDN Basic Rate Interface Installation

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Isdn Basic Rate Interface InstallationPage Revision history Standard 7.00 January Contents 6 of 46 Contents About this document 8 of 46 About this document Standard 7.00 January Prepare the site Preinstallation preparationContents Reference listUnpack and inspect System Engineering Power EngineeringTake inventory 12 of 46 Preinstallation preparation Standard 7.00 January Install Isdn BRI hardware Install Isdn BRI hardware for line applications Select the card slots To install Isdn BRI cards, perform the following stepsSILCs/UILCs MISPsBRSCs PRI/DTI NT8D35 Network moduleNT8D37 IPE module NT5D21 Core/Network module Remove the module cover for card installationModule cover locking latches Install the MispRemove the Misp Install the BRSC, Silc and UilcConnect Isdn BRI terminals to Meridian Remove the BRSC, Silc and UilcConnect Isdn BRI terminals to Meridian Connect Meridian 1 modules to the MDF Connect the Meridian 1 to the MDF SILC/UILC port designations at the MDF26 of 46 Install Isdn BRI hardware Install Isdn BRI hardware Page 27 Cross-connect the MDF Cross-connect Silc and/or Uilc ports to the building wiring Distribution frame Note Cross-connect the Silc port to the office wiringCross-connect the Uilc port to the office wiring Port Silc UilcBL / BL-R 34 of 46 Install Isdn BRI hardware Connect the terminating resistors Connect the Isdn BRI terminals to the DSLConnect the Isdn BRI terminal to the S/T interface Install Isdn BRI hardware Page 37 Install the clock reference on the Silc Install Isdn BRI hardware for trunk applicationsInstall Isdn BRI hardware Page 39 Isdn BRI clock reference tables Code Length feet Use Connect clock reference cablesClock reference cable connection Clock recoveryCross-connect the Main Distribution Frame MDF Install the Silc and the UilcConnect Meridian 1 to the Main Distribution Frame MDF Install Isdn BRI hardware Page 43 Card location forms Number Slot number Connector PortsInstall Isdn BRI hardware Page 45 46 of 46 Install Isdn BRI hardware Standard 7.00 January Page Isdn Basic Rate Interface Installation

553-3901-200 specifications

Nortel Networks was a prominent telecommunications and data networking equipment manufacturer, known for its innovative products that catered to businesses and service providers worldwide. One of its notable offerings was the Nortel Networks Model 553-3901-200, a versatile device designed to enhance communication solutions across various networks.

The Nortel 553-3901-200 is a versatile and robust platform that primarily functions as a voice gateway, bridging traditional telephony and modern IP-based systems. This gateway is particularly significant in facilitating the transition from legacy phone systems to Voice over IP (VoIP) solutions, offering businesses a seamless integration process coupled with substantial cost-saving benefits.

One of the key features of the 553-3901-200 is its support for multiple protocols, enabling it to work efficiently in a variety of network environments. It supports Session Initiation Protocol (SIP), H.323, and MGCP, which ensures compatibility with various telephony systems and enables organizations to maintain their existing infrastructure while upgrading their capabilities. This multi-protocol support enhances interoperability, allowing different communication systems to connect without significant reconfiguration.

The device also boasts advanced call processing capabilities, which include port and bandwidth management, allowing for efficient handling of voice traffic. This feature is critical in ensuring high-quality voice communication, minimizing latency, and reducing packet loss during conversations. Moreover, it offers functionalities such as call routing, number translation, and secure voice sessions, ensuring that organizations can provide reliable services to their customers.

Security is another vital characteristic of the Nortel 553-3901-200. It includes robust encryption standards, protecting voice communications from eavesdropping and ensuring compliance with regulatory requirements. The device also features firewall capabilities, adding an additional layer of protection against unauthorized access.

In terms of scalability, the Nortel 553-3901-200 is designed to grow with a business's needs. It can support a wide range of user capacities, making it suitable for small organizations as well as larger enterprises. Its flexibility allows businesses to expand their communications solutions without the need for significant upfront investments in new hardware.

Overall, the Nortel Networks 553-3901-200 is an exemplary telecommunications gateway that combines advanced features, reliable performance, and security measures. It truly embodies Nortel's commitment to delivering high-quality communication products that cater to the evolving needs of modern businesses. As organizations continue to transition to IP-based communication systems, devices like the 553-3901-200 will remain crucial in facilitating efficient and secure voice communication solutions.
Top Page Image Contents