CTA 150i card installation 3
Installing the CTA 150i card
When you are ready to begin installing the card, power down the PC and unplug the PC’s power cord from the wall outlet. Make sure that you have the proper size screwdrivers for the task.
To install the CTA 150i card:
1.Remove the outer cover from your PC.
2.Select an unused expansion slot.
3.Remove the cover of the selected expansion slot from the rear panel of the PC. Save the retaining screw.
4.If a plastic insert covers the expansion slot, use a screwdriver to remove it. You can discard the insert.
5.Insert the CTA 150i card into the selected slot. Align the elongated notch on the card bracket with the screw hole in the rear panel of the PC.
6.Insert and tighten the retaining screw that you removed in step 3.
7.Replace the PC’s cover and secure it properly.
8.Plug the PC power cord into the wall outlet and turn the power switch to the ON position.
Computer Telephony Adapter 150 Installation Guide