Nortel Networks manual Connecting the CTA 150i card to Norstar

Page 6

4CTA 150i card installation

Connecting the CTA 150i card to Norstar

The CTA 150i card does not need a dedicated Norstar phone line. It can share a phone line with one of the following Norstar phones:

M7100

M7208

M7310 (May be equipped with a busy lamp field)

M7324 (May be equipped with an attached Central Answering Position)

In addition, the following requirements must be met:

The line cord that connects the phone to the CTA 150i card must be no longer than 15 m (50 ft).

If the telephone line that connects the CTA 150i card to the Norstar KSU is longer than 304 m (1000 ft), you must install a loop power supply to provide power to the Norstar telephone when the PC is not on.

The telephone line that connects the CTA 150i card to the Norstar KSU must be no longer than 853 m (2800 ft).

Connecting the CTA 150i card to the Norstar KSU:

1.If there is a Norstar phone plugged into the telephone outlet that you want to use, unplug it.

2.Plug one end of the line cord (provided with the CTA 150i card) into the telephone outlet.

3.Plug the other end of the line cord into the jack labeled “LINE” on the CTA 150i card.

4.Plug the Norstar telephone into the jack labeled “PHONE” on the CTA 150i card.

Computer Telephony Adapter 150 Installation Guide

Image 6
Contents CTA 150i Installation Guide Page Setting the address switch CTA 150i card installationInstalling the CTA 150i card in your PC Overview of this chapterCTA 150i card address settings Installing the CTA 150i card Connecting the CTA 150i card to Norstar Preparing for installation Overview of Norstar Tapi SP installationPC system requirements Minimum hardware requirementsMinimum software requirements Norstar KSU requirements Norstar KSU configuration Pre-installation checklist Norstar Tapi SP installationNorstar Tapi SP software installation Windows 3.1 Click Driver SetupInstalling Norstar Tapi SP software Norstar Tapi SP Installation dialog boxConnection Hardware Properties dialog box Configuring Norstar Tapi SP PortBase Address Norstar Tapi SP Configuration dialog box Click HardwareConnection Hardware Properties dialog box Norstar Tapi SP installation Page Guide d’installation de la carte CTA Page Installation de la carte CTA Aperçu du présent chapitreRéglages des adresses de la carte CTA Installation de la carte CTA Raccordement de la carte CTA 150i à NorstarRaccorder la carte CTA 150i au MEC Norstar Préparer l’installation Aperçu de l’installation du FS-IPAT NorstarExigences des systèmes PC Exigences minimales en termes de matériel Exigences minimales en termes de logicielExigences du MEC Norstar Configuration du MEC Norstar Installation du FS-IPAT Norstar Installation du logiciel FS-IPAT NorstarPré-installation liste de vérification Installer le logiciel du FS-IPAT Norstar Fenêtre de dialogue Installation du FS-IPAT Norstar Accès Adresse de baseConfigurer le FS-IPAT Norstar Cliquer sur Matériel IRQ Page Guía de instalación de la tarjeta CTA Page Instalación de la tarjeta CTA 150I en su PC Instalación de la tarjeta CTAVisión general de este capítulo Programación del conmutador de direccionesOFF Instalación de la tarjeta CTA Conexión de la tarjeta CTA 150I a Norstar Preparación para la instalación Visión general de la instalación del PS Tapi NorstarRequerimientos de PC del sistema Requerimientos mínimos de hardwareRequerimientos mínimos de software Requerimientos de la USM Norstar Configuración de la USM Norstar Lista de control previa a la instalación Instalación del PS Tapi NorstarInstalación del software del PS Tapi Norstar Windows 3.1Clic en Instalación del controladorInstalación del software del PS Tapi Norstar Instalación del PS Tapi Norstar Puerto Dirección baseConfiguración del PS Tapi Norstar Clic en Hardware IRQ Page Page P0871539