Transcend Information TS64, TS128GSSD18M-M dimensions TS32/64/128GSSD18M-M

Page 10

TS32/64/128GSSD18M-M

1.8” Portable Solid State Drive

 

 

 

Figure 6 : cominit sequence

Description:

1.Host/device are powered and operating normally with some form of active communication.

2.Some condition in the device causes the device to issues a COMINIT

3.Host calibrates and issues a COMWAKE.

4.Device responds – The device detects the COMWAKE sequence on its RX pair and calibrates its transmitter (optional). Following calibration the device sends a six burst COMWAKE sequence and then sends a continuous stream of the ALIGN sequence starting at the device's highest supported speed. After ALIGNP Dwords have been sent for 54.6 us (2048 nominal Gen1 Dword times) without a response from the host as determined by detection of ALIGNP primitives received from the host, the device assumes that the host cannot communicate at that speed. If additional speeds are available the

device tries the next lower supported speed by sending ALIGNP Dwords at that rate for 54.6 us (2048 nominal Gen1 Dword times.) This step is repeated for as many slower speeds as are supported. Once the lowest speed has been reached without response from the host, the device enters an error state.

5.Host locks – after detecting the COMWAKE, the host starts transmitting D10.2 characters at its lowest supported rate. Meanwhile, the host receiver locks to the ALIGN sequence and, when ready, returns the ALIGN sequence to the device at the same speed as received. A host shall be designed such that it acquires lock in 54.6 us (2048 nominal Gen1 Dword

Transcend Information Inc.

10

V1.2

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Placement Description FeaturesDimensions V1.2Portable Solid State Drive SpecificationsMtbf Package Dimensions Pinouts eSATA Pin Assignments Pinouts USBPin Identification USB Pin Identification eSATABlock Diagram ECC algorithm ReliabilityWear-Leveling algorithm Bad-block managementOut of bank signaling Sata InterfaceComreset Cominit TS32/64/128GSSD18M-M Power on sequence timing diagram Power on sequenceTS32/64/128GSSD18M-M Command Name Code Command TableATA command register Parameters UsedWrite DMA ATA Command Specifications Identify Device Information Default Value Word Value DescriptionPIO data transfer cycle timing mode TS32/64/128GSSD18M-M 302Bh TS32/64/128GSSD18M-M TS32/64/128GSSD18M-M 0000h Reserved for expended supported and enabled settings Idle E3h Feature SetAccess Idle Immediate E1hRead Sectors 20h/21h Read Multiple C4hRead Multiple EXT 29h Read Sectors EXT 24hFeatures register Value and settable operating mode Smart Read Data Byte 2-361 Individual attribute dataByte Description Attribute ID information is listed in the following table Description Detail Information ByteSmart Save Attribute Value Smart ENABLE/DISABLE Attribute AutosaveSmart Read Attribute Threshold Smart Execute OFF-LINE ImmediateSmart Return Status Smart Disable OperationsSmart ENABLE/DISABLE Automatic OFF-LINE Standby E2hWrite DMA EXT 35h Write Buffer E8hWrite DMA CAh Write DMA FUA EXT 3DhWrite Sectors 30h/31h Write Sectors EXT 34hOrdering Information Taiwan Germany

TS128GSSD18M-M, TS64, TS32 specifications

Transcend Information, a leading manufacturer in digital storage and memory products, offers a range of solid-state drives (SSDs) that are designed to cater to both consumer and professional needs. Among their popular offerings are the TS32GSSD18M-M, TS64GSSD18M-M, and TS128GSSD18M-M models. These drives are compact, high-performance solutions that enable users to enhance their computing experience significantly.

One of the main features of the Transcend TS SSD series is their form factor. They are designed in a 2.5-inch format, making them compatible with a wide variety of devices, including laptops, desktops, and even some gaming consoles. This versatility allows users to upgrade their existing systems and benefit from enhanced speed and efficiency.

In terms of performance, the TS series SSDs leverage the SATA III 6Gb/s interface, which maximizes the data transfer speed, ensuring quicker boot times, faster application launches, and improved file transfer rates compared to traditional hard drives. With sequential read speeds of up to 560MB/s and write speeds of up to 400MB/s, users can experience notable improvements in overall system responsiveness.

Another characteristic of the Transcend TS SSDs is their durability. Utilizing advanced 3D NAND flash technology, these drives provide higher density and increased reliability compared to conventional NAND. The absence of moving parts also contributes to their shock resistance, making them a reliable choice for mobile users and those who need dependable storage solutions for intensive tasks.

The TS SSDs also come equipped with features that enhance their longevity. They support wear leveling, which ensures even distribution of data writes across the drive, reducing the risk of premature wear. Additionally, the built-in static and dynamic wear leveling algorithms optimize the lifespan of the SSDs, making them a smart investment for both personal and professional use.

For users concerned with data integrity, the TS series offers advanced error correction technology that protects against data corruption, thereby ensuring the longevity and reliability of stored information. The drives also feature TRIM support, which keeps the SSD performance consistent over time, especially after prolonged use.

In conclusion, Transcend Information's TS32GSSD18M-M, TS64GSSD18M-M, and TS128GSSD18M-M models represent a robust suite of solid-state drives that offer speed, durability, and reliability. They are an excellent choice for users seeking to upgrade their storage solutions and experience the benefits of modern technology in their day-to-day activities. Whether for casual use, intensive applications, or professional settings, these SSDs deliver performance that meets the demands of the contemporary digital landscape.
Top Page Image Contents