Transcend Information TS128GSSD18M-M, TS64, TS32 dimensions ATA Command Specifications

Page 15

TS32/64/128GSSD18M-M

1.8” Portable Solid State Drive

ATA Command Specifications

CHECK POWER MODE (E5h)

The host can use this command to determine the current power management mode.

EXECUTE DIAGNOSTICS (90h)

This command performs the internal diagnostic tests implemented by the drive.

FLUSH CACHE (E7h)

This command is used by the host to request the device to flush the write cache. If there is data in the write cache, that data shall be written to the media. The BSY bit shall remain set to one until all data has been successfully written or an error occurs.

FLUSH CACHE EXT (EAh)

48-bit feature set mandatory command. This command is used by the host to request the device to flush the write cache. If there is data in the write cache, that data shall be written to the media. The BSY bit shall remain set to one until all data has been successfully written or an error occurs.

IDENTIFY DEVICE (ECh)

This commands read out 512Bytes of drive parameter information. Parameter Information consists of the arrangement and value as shown in the following table. This command enables the host to receive the Identify Drive Information from the device.

Transcend Information Inc.

15

V1.2

Page 14 Page 16
Image 15
Page 14 Page 16
Contents V1.2 Description FeaturesDimensions PlacementSpecifications Portable Solid State DriveMtbf Package Dimensions Pin Identification eSATA Pin Assignments Pinouts USBPin Identification USB Pinouts eSATABlock Diagram Bad-block management ReliabilityWear-Leveling algorithm ECC algorithmSata Interface Out of bank signalingComreset Cominit TS32/64/128GSSD18M-M Power on sequence Power on sequence timing diagramTS32/64/128GSSD18M-M Parameters Used Command TableATA command register Command Name CodeWrite DMA ATA Command Specifications Word Value Description Identify Device Information Default ValuePIO data transfer cycle timing mode TS32/64/128GSSD18M-M 302Bh TS32/64/128GSSD18M-M TS32/64/128GSSD18M-M 0000h Reserved for expended supported and enabled settings Idle Immediate E1h Feature SetAccess Idle E3hRead Sectors EXT 24h Read Multiple C4hRead Multiple EXT 29h Read Sectors 20h/21hFeatures register Value and settable operating mode Byte 2-361 Individual attribute data Smart Read DataByte Description Description Detail Information Byte Attribute ID information is listed in the following tableSmart Execute OFF-LINE Immediate Smart ENABLE/DISABLE Attribute AutosaveSmart Read Attribute Threshold Smart Save Attribute ValueStandby E2h Smart Disable OperationsSmart ENABLE/DISABLE Automatic OFF-LINE Smart Return StatusWrite DMA FUA EXT 3Dh Write Buffer E8hWrite DMA CAh Write DMA EXT 35hWrite Sectors EXT 34h Write Sectors 30h/31hTaiwan Germany Ordering Information

TS128GSSD18M-M, TS64, TS32 specifications

Transcend Information, a leading manufacturer in digital storage and memory products, offers a range of solid-state drives (SSDs) that are designed to cater to both consumer and professional needs. Among their popular offerings are the TS32GSSD18M-M, TS64GSSD18M-M, and TS128GSSD18M-M models. These drives are compact, high-performance solutions that enable users to enhance their computing experience significantly.

One of the main features of the Transcend TS SSD series is their form factor. They are designed in a 2.5-inch format, making them compatible with a wide variety of devices, including laptops, desktops, and even some gaming consoles. This versatility allows users to upgrade their existing systems and benefit from enhanced speed and efficiency.

In terms of performance, the TS series SSDs leverage the SATA III 6Gb/s interface, which maximizes the data transfer speed, ensuring quicker boot times, faster application launches, and improved file transfer rates compared to traditional hard drives. With sequential read speeds of up to 560MB/s and write speeds of up to 400MB/s, users can experience notable improvements in overall system responsiveness.

Another characteristic of the Transcend TS SSDs is their durability. Utilizing advanced 3D NAND flash technology, these drives provide higher density and increased reliability compared to conventional NAND. The absence of moving parts also contributes to their shock resistance, making them a reliable choice for mobile users and those who need dependable storage solutions for intensive tasks.

The TS SSDs also come equipped with features that enhance their longevity. They support wear leveling, which ensures even distribution of data writes across the drive, reducing the risk of premature wear. Additionally, the built-in static and dynamic wear leveling algorithms optimize the lifespan of the SSDs, making them a smart investment for both personal and professional use.

For users concerned with data integrity, the TS series offers advanced error correction technology that protects against data corruption, thereby ensuring the longevity and reliability of stored information. The drives also feature TRIM support, which keeps the SSD performance consistent over time, especially after prolonged use.

In conclusion, Transcend Information's TS32GSSD18M-M, TS64GSSD18M-M, and TS128GSSD18M-M models represent a robust suite of solid-state drives that offer speed, durability, and reliability. They are an excellent choice for users seeking to upgrade their storage solutions and experience the benefits of modern technology in their day-to-day activities. Whether for casual use, intensive applications, or professional settings, these SSDs deliver performance that meets the demands of the contemporary digital landscape.
Top Page Image Contents