Boot-Up Function for Windows XP

USB HDD option is only supported for the partition type of “Public Area Only” in Windows 98/98SE. To keep the Security Function in Windows, you can only select USB ZIP as the boot-up type.

7.The Warning message appears. Be sure you have made a backup of all the files on your JetFlash. Click OK to continue or Cancel to exit.

8.The Completed alert box appears. JetFlash is now ready for use as an MS-DOS Boot Disk. Click OK to close the window.

When you have completed this process, JetFlash will contain the files needed to use the Boot-up function. Do not remove any of these files, or boot-up using JetFlash will fail.

If USB HDD was selected, the C:\> prompt will appear after using JetFlash to boot up. If USB ZIP was selected, the screen will show the A:\> prompt.

1.Insert a new floppy disk into the Floppy Disk Drive (A:). Go to the My Computer window and right click on the Floppy Disk（A:） icon. Select Format… from the pull-down menu.