Transporting

∙Do not pack the StoreJet 25 into luggage without proper padded support. Other items in your luggage may damage the drive during travel if it does not have proper protection.

∙Avoid squeezing or compressing the StoreJet 25.

∙Do not place objects on top of your StoreJet 25.

Power

∙The StoreJet gets its power directly from your computer’s USB port. However, the power supplied by the USB ports on some older computers does not meet the stable 5V DC power requirements of the StoreJet. If your StoreJet does not function properly upon connecting it to your computer, please plug BOTH ENDS of the USB Y-cable into your computer.

Both ends of the USB Y-cable should be connected to provide ample power to the StoreJet

The Power Cable can provide additional power for the StoreJet 25 if necessary (SJ25M3 / SJ25D3)

∙Use only the USB cable that came with the StoreJet 25 to connect it to a computer, and always ensure that the cable you are using is in good condition. NEVER use a cable that is frayed or damaged.

∙Ensure nothing is resting on the USB cable and that the cable is not located where it can be tripped over or stepped on.

Reminders

Always follow the procedures in the “Disconnecting from a Computer” section to remove the StoreJet from your computer.