Transcend Information Computer Drive user manual Connecting to a Computer︱ USB Cable

Page 6

Connecting to a Computer︱

USB Cable

Power

Connector

Micro / Mini

USB Connector

USB 2.0 / 3.0

Connector

1.Plug the small end (1) of the USB cable into the StoreJet 25.

2.Plug BOTH large ends (2) and (3) of the USB cable into an available USB 2.0 or USB 3.0 port on your desktop or notebook computer.

NOTE: Always plug both large ends of the Y-cable into your computer. If only one USB port is available, please connect the data transfer end (2) of the Y-cable (compatibility not guaranteed).

(SJ25M3 / SJ25D3)

3

Image 6

Contents User’s Manual Table of Contents Introduction︱ General Use USB 3.0 Models USB 2.0 ModelsTransporting Connecting to a Computer︱ USB Cable Power Connector Micro / Mini USB Connector USB 2.0Page Page Select StoreJet models only Disconnecting from a Computer︱ WindowsLinux You must have Administrator Rights to format in Windows Formatting the Hard Drive︱Windows XP Windows 7/Vista Page Press Start Mac OS Page Linux Troubleshooting︱ StoreJet 25 does not power onMy operating system cannot detect the StoreJet Cannot detect the StoreJet 25 in Linux ’m having problems with the StoreJet 25 on my MacCannot copy large files to the StoreJet Drive will erase all existing data on the driveSpecifications︱ Recycling & Environmental Considerations︱ Three-year Limited Warranty︱ Transcend Warranty Policy Online registrationLimitations