To Play MP3 Music
1.Make sure you have downloaded MP3 or WMA files to the root directory of your JetFlash.
2.Disconnect JetFlash from your computer.
3.Connect the earphone with the earphone jack 
.
4.Set HOLD 
switch to “OFF” position.
5.Press and hold the PLAY/PAUSE 
button for a few seconds to power on (enter MP3 mode). The Power/Play LED turns green.
6.Press the PLAY/PAUSE 
button again. The Power/Play LED blinks green and the MP3/WMA files are played back, in alphabetical order.
7.To pause music playback, press PLAY/PAUSE 
button.
8.To power off, press and hold the PLAY/PAUSE 
button until the Power/Play LED turns off.
For more operating instructions, please refer to Basic Operation.
AB Repeat Function
Following the procedures below, you can repeat a portion of one track. Make sure the HOLD 
switch is set to “OFF”.
1.Enter MP3 mode and play the tracks.
2.Press the Volume Control Wheel 
to tag the beginning of the portion you wish to repeat. The Repeat LED blinks orange at fast speed, and music playback continues.
3.Press the Volume Control Wheel 
again to tag the end of the portion you wish to repeat. The Repeat LED blinks orange at slow speed, and the tagged portion is played as a continuous loop.
4.To resume normal playback, press the Volume Control Wheel 
.
For more operating instructions, please refer to Basic Operation.
Voice Recording Function
To Record Voice
1.Disconnect JetFlash from your computer.
2.Set HOLD switch to “OFF” position.
3.Press and hold the PLAY/PAUSE 
button for a few seconds to power on (enter MP3 mode). The Power/Play LED turns green.
4.Press and hold the REC 
button for a few seconds to enter Record mode. The
10