Transcend Information 25F user manual Unreadable drive pop-up window

Page 17

11.The format process may take a few minutes. When complete, an “O.K.” message will appear in the bottom right-hand corner of the window.

Figure 15: Format Complete

12.Click the “Close” button to finish and exit.

Mac® OS

1.Plug the StoreJet 25 into an available USB port on your MAC computer.

2.Unplug all other external storage devices from your computer. This is to prevent accidental format of a different drive.

3.Click the “Initialize” button.

Figure 16: “Unreadable drive” pop-up window

4.In the Disk Utility window, select the new drive from the list on the left.

5.Select the “Erase” tab.

6.Choose the Volume Format you want (Mac OS Extended (journaled) is recommended).

15

Image 17

Contents StoreJet 25F User’s Manual Table of Contents Introduction︱ Quick Start Guide System Requirements︱ General Use Reminders StoreJet 25F Product Overview︱Mini USB to Standard-A USB cable USB Y-cable Connecting to a Computer︱Page Windows 2000, XP and Windows Vista Disconnecting from a Computer︱Linux Kernel 2.4 or Later Windows 2000/XP Formatting the Hard Drive︱Click the Close button to finish and exit Run as administrator Press Start Unreadable drive pop-up window Click Erase again to confirm Erase Disk confirmation window My computer does not recognize the StoreJet 25F Troubleshooting︱My operating system cannot detect the StoreJet 25F StoreJet 25F does not Power-ON Ordering Information︱ Specifications︱Transcend Information, Inc Transcend Limited Warranty︱