MGE UPS Systems 2200C, 3200C Transfer to battery power, Threshold for the low-battery warning

Page 16

3. Operation

3.3Operation on battery power (following failure of AC input power)

Transfer to battery power

BYPASS 2 1

test

The AC-power source is outside tolerances, LED 17 is ON, the buzzer beeps three times.

The equipment connected to the UPS is supplied by the battery.

17

Threshold for the low-battery warning

BYPASS 2 1

test

17

The low-battery warning threshold can be set by the user, with the UPS Driver software (see section 3.4).

LED 17 flashes.

The buzzer beeps every three seconds.

%

There is very little remaining battery backup time. Close all applications because UPS automatic shutdown is imminent.

End of backup time

BYPASS 2 1

test

22

The buzzer sounds continuously.

Press button 22 to turn the buzzer OFF.

The equipment is no longer supplied with power.

%

The UPS goes to sleep mode at the end of the battery backup time until complete shutdown due to tripping of the battery- protection function against deep discharge.

Return of AC input power:

If, in spite of the return of AC input power, the UPS does not restart, check that the automatic-restart function (activated by return of AC input power) has not been disabled (see section 3.4).

Page 16 - 34007532EN/AA

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Pulsar EXtreme Introduction Foreword Using this documentPictograms 4 34007532EN/AA Contents Technical characteristics Glossary Index Presentation Standard positionsRack position Tower positionBack Pulsar EXtreme 2200CPulsar EXtreme 3200C Pulsar EXB 2200Control panel Alarms BatteryLoad Installation Unpacking and parts checkInstallation in rack position Installation in tower position Connect the two supports for the upright positionInstallation of the communications-card option Connection to the RS232 or USB communications port optionalConnections Operation Start-upBargraph indications Status LEDs 20 and 21 for programmable outlets 1Transfer to battery power Threshold for the low-battery warningEnd of backup time Equipment connected to the UPS is supplied by the batteryBattery tab Personalisation optionalFunction On / OFF conditions tabUPS shutdown Output tabBypass tab Press button 16 return to the OFF positionUPS remote power off Installation and test of the remote power off functionTroubleshooting MaintenanceIndication Diagnostic Correction Indication Signification Correction Safety rules Replacement of the battery moduleRemoval of battery module Reinstallation of the battery module UPS recycling at the end of service life EnvironmentThis product has been designed to respect the environment PackingTechnical characteristics AppendicesGlossary UPS on / OFF via softwareIndex Connection28 34007532EN/AA

3200C, 2200C specifications

MGE UPS Systems is a renowned manufacturer specializing in uninterruptible power supplies (UPS), and their models 2200C and 3200C are exemplary representations of their commitment to quality, efficiency, and technological advancement. Both models are designed to ensure that critical equipment remains powered during outages, safeguarding important data and maintaining operational continuity.

The MGE UPS 2200C is a versatile and compact UPS solution that provides a robust capacity of 2200 VA. Its design caters to small to medium-sized businesses that require reliable power protection for servers, network equipment, and telecommunications systems. This model features a double conversion architecture that delivers clean, stable power, effectively insulating connected devices from power irregularities such as surges and sags. One of the key technologies employed in the 2200C is the use of IGBT (Insulated Gate Bipolar Transistor) technology, which enhances efficiency and reduces overall energy consumption.

On the other hand, the MGE UPS 3200C offers a higher capacity of 3200 VA, making it suitable for larger setups that demand more power protection. Like its smaller counterpart, the 3200C utilizes double conversion technology, ensuring optimal power quality at all times. This model incorporates advanced features such as adjustable output voltage and frequency to match the requirements of specific equipment. Additionally, it supports parallel operation, allowing for scalability and redundancy, which are crucial for mission-critical applications.

Both UPS models come integrated with an LCD interface, providing real-time monitoring of critical parameters such as input/output voltage, load levels, and battery status. This user-friendly display allows for easy management and maintenance, which is essential for IT administrators.

Battery management in both models is enhanced through intelligent charging algorithms that prolong battery life and reliability. They also feature multiple communication options, including USB and RS-232, facilitating seamless integration with various management software for remote monitoring and control.

In conclusion, the MGE UPS 2200C and 3200C are efficient and reliable UPS solutions equipped with advanced technologies and features that cater to a wide range of power protection needs. Their robust design, high efficiency, and user-friendly interfaces make them ideal choices for businesses looking to safeguard their critical operations against power disturbances.
Top Page Image Contents