Anton/Bauer ProPac 13/14, Trimpac 13/14 owner manual Service

Page 11

SERVICE

In the unlikely event a Logic Series battery fails to deliver acceptable performance it must be returned to the Anton/Bauer Service Center that is the only facility qualified and equipped to service the Logic Series batteries and calibrate the electronic components and sensors. Any attempt by the user or any other unauthorized persons to service this battery will surely result in improper calibration of the electronic components resulting in severe battery damage and/or safety hazards to the operator, in addition to voiding any/all remaining unconditional or pro- rated warranty conditions. Therefore:

1.DO NOT attempt to service this battery under any circumstances.

2.DO NOT send this battery for service to anyone other than the Anton/Bauer Service Center.

3.DO NOT rebuild this battery - At the end of its useful life contact the Anton/Bauer Service Center.

4.DO NOT DISPOSE OF THIS BATTERY. This battery contains sealed Nickel-Cadmium cells and must be disposed of properly. Anton/Bauer participates in a recycle program that handles Nickel- Cadmium battery products (see the back page of this manual).

- 9 -

Image 11
Contents Battery System Table of Contents High Voltage Design FeaturesPropac ApplicationsCharging with Logic Series Chargers TrimpacOVER-DISCHARGED Batteries Preventative Maintenance Guidelines for Optimum Performance Maximum Life Short / Fuse Replacement Charge Status Indicator Service Capacity Typical SpecificationsPage Worldwide standard