The Trimpac batteries have an internal resettable fuse. on the battery, the fuse will automatically “open”. removed, the battery will resume to normal operation.
If a short is placed When the short is
If the battery continues to blow fuses, test the equipment being powered for any short circuit at the D.C. power input.
If no short is found, contact the Anton/Bauer Customer Support Department for assistance at
CHARGE STATUS INDICATOR
This Logic Series battery has a manually selectable charge status indicator located on the back of the battery (see Diagram A).
To Use:
Manually slide the selector to the right (towards the center of the battery back) to indicate a green or charged battery status.
Or
Manually slide the selector to the left (towards the outside edge of the battery back) to indicate a red or discharged battery status.
- 8 -