Pioneer PDP-42MVE1 manual Option2 Settings Menu, Setting the power management for computer images

Option2 Settings Menu

Setting the power management for computer images

This energy-saving (power management) function automatically reduces the monitor’s power consumption if no operation is performed for a certain amount of time.

Example: Turning the power management function on

Set “ADVANCED OSD” to “ON” in the main menu (1/ 2), then perform the following operations.

On “PWR. MGT.” of “OPTION2” menu, select “ON”.

	OPTION2		2 / 3
PREVIOUS PAGE
PWR. MGT.		:	ON
PURECINEMA		:	ON
LONG LIFE
SIDE MASK		:	3
S1/S2		:	OFF
DVI SET-UP
NEXT PAGE
SEL.	ADJ.	EXIT RETURN

Information

Power management function

*The power management function automatically reduces the monitor’s power consumption if the computer’s keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer.

*If the computer’s power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state.

*For instructions on using the computer’s power management function, refer to the computer’s operating instructions.

Power management settings

ON: In this mode the power management function is turned on.

OFF: In this mode the power management function is turned off.

Power management function and STANDBY/ ON indicator

The STANDBY/ON indicator indicates the status of the power management function. See below for indicator status and description.

STANDBY/ON indicator

Power	STANDBY/	Power	Description	Turning the picture
management	ON indicator	management		back on
mode		operating status
On	Green	Not activated.	Horizontal and vertical	Picture already on.
			synchronizing signals
			are present from the
			computer.
Off	Red	Activated.	Horizontal and/or	Operate the keyboard or
			vertical synchronizing	mouse. The picture
			signals are not sent	reappears.
			from the computer.

Setting the picture to suit the movie

The film image is automatically discriminated and projected in an image mode suited to the picture. [NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]

Example: Setting the “PURECINEMA” to “OFF”

Set “ADVANCED OSD” to “ON” in the main menu (1/ 2), then perform the following operations.

On “PURECINEMA” of “OPTION2” menu, select “OFF”.

	OPTION2		2 / 3
PREVIOUS PAGE
PWR. MGT.		:	OFF
PURECINEMA		:	OFF
LONG LIFE
SIDE MASK		:	3
S1/S2		:	OFF
DVI SET-UP
NEXT PAGE
SEL.	ADJ.	EXIT RETURN

Information

PURECINEMA

ON: Automatic discrimination of the image and projection in PURECINEMA.

OFF: PURECINEMA does not function.

Reducing burn-in of the screen

The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce burn-in of the screen.

Set “ADVANCED OSD” to “ON” in the main menu (1/ 2), then perform the following operations.

On “OPTION2” menu, select “LONG LIFE”, then press the MENU/SET button.

The “LONG LIFE” screen appears.

	LONG LIFE
ABL		:	AUTO
ORBITER		:	OFF
INVERSE		:	OFF
SCREEN WIPER		:	OFF
SOFT FOCUS		:	OFF
SEL.	ADJ.	EXIT RETURN

ABL (Auto Brightness Limiter)

Use this to activate the brightness limiter.

Example: Setting “ABL” to “LOCK1”

On “ABL” of “LONG LIFE” menu, select “LOCK1”.

	LONG LIFE
ABL		:	LOCK1
ORBITER		:	OFF
INVERSE		:	OFF
SCREEN WIPER		:	OFF
SOFT FOCUS		:	OFF
SEL.	ADJ.	EXIT RETURN

Information

ABL settings

AUTO: The brightness of the screen is adjusted automatically to suit the picture quality.

LOCK1, 2, 3: Sets maximum brightness.

The brightness level decreases in the order of LOCK 1, 2, 3. LOCK 3 provides minimum brightness.

English

OSD (On Screen Display) Controls

19

En