Pioneer PDP-42MVE1 Picture Settings Menu, Adjusting the picture, Reducing noise in the picture

English

OSD (On Screen Display) Controls

14

Picture Settings Menu

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be adjusted as desired.

Example: Adjusting the contrast

On “CONTRAST” of “PICTURE” menu, adjust the contrast.

	PICTURE		1 / 2
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
AV SELECTION		:	STD
DNR		:	OFF
NEXT PAGE				CONTRAST	52
SEL.	ADJ.	EXIT RETURN

Note: If “CAN NOT ADJUST” appears ...

When trying to enter the PICTURE submenu, make sure AV SELECTION is not set to DEFAULT.

Information

Picture adjustment screen CONTRAST: Changes the picture’s white level. BRIGHTNESS: Changes the picture’s black level. SHARPNESS: Changes the picture’s sharpness. Adjusts picture detail of VIDEO display.

COLOR: Changes the color density.

TINT: Changes the picture’s tint. Adjust for natural colored skin, background, etc.

Adjusting the computer image

Only the contrast and brightness can be adjusted when a computer signal is connected.

Restoring the factory default settings

Select “DEFAULT” under the “AV SELECTION” settings.

Setting the picture modes according to the brightness of the room

There are four picture modes that can be used effectively according to the environment in which you are viewing the display.

Example: Setting the “MOVIE 1” mode

On “AV SELECTION” of “PICTURE” menu, select “MOVIE 1”.

	PICTURE		1 / 2
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
AV SELECTION		:	STD
DNR		:	OFF
NEXT PAGE				AV SELECTION	: MOVIE 1
SEL.	ADJ.	EXIT RETURN

Information

Types of AV SELECTIONS

MOVIE 1, 2: Set this mode when watching video in a dark room.

This mode provides darker, finer pictures, like the screen in movie theaters.

For a darker image, select MOVIE 2.

STD: Set this mode when watching video in a bright room. This mode provides pictures with distinct differences between light and dark sections.

DYNAMIC: This mode provides brighter pictures than STD.

DEFAULT: Use this to reset the picture to the factory default settings.

Reducing noise in the picture

Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor.

Example: Setting “HIGH”

On “DNR” of “PICTURE” menu, select “HIGH”.

	PICTURE		1 / 2
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
AV SELECTION		:	STD
DNR		:	OFF
NEXT PAGE				DNR	: HIGH
SEL.	ADJ.	EXIT RETURN

Information

DNR

*“DNR” stands for Digital Noise Reduction.

*This function reduces noise in the picture.

 Types of noise reduction

There are three types of noise reduction. Each has a different level of noise reduction.

The effect increases stronger in the order of LOW, MID and High.

OFF: Turns the noise reduction function off.

Setting the color temperature

Use this procedure to set color tone produced by the plasma display.

Example: Setting “HIGH”

On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.

	PICTURE		2 / 2
PREVIOUS PAGE
COLOR TEMP.		:	HIGH
GAMMA		:	2
LOW TONE		:	AUTO
C.DETAIL ADJ.
SEL.	ADJ.	EXIT RETURN

Information

Setting the color temperature LOW: Redder

MID LOW: Slightly red

MID: Standard (slightly bluer)

HIGH: Bluer

En