English

Rear View/ Terminal Board

Part Names and Function

6

En

AAC IN

Connect the included power cord here.

BEXT SPEAKER L and R

Connect speakers (optional) here. Maintain the correct

polarity. Connect the (positive) speaker wire to the

EXT SPEAKER terminal and the (negative)

speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels.

Please refer to your speaker’s owner’s manual.

CVIDEO1, 2, 3 (BNC, RCA, S-Video)

Connect VCR’s, DVD’s or Video Cameras, etc. here. VIDEO1 can be used for Input or Output (see page 24).

DAUDIO1, AUDIO2, AUDIO3 These are audio input terminals.

The input is selectable. Set which video image to allot them from the SOUND menu screen.

ECOMPONENT1

Connect DVD’s, High Definition or Laser Discs, etc. here.

FPC2/COMPONENT2

PC2:

You can connect an analog RGB signal

 

and the syncronization signal.

COMPONENT2: You can connect DVDs, High Definition sources, Laser Discs, etc. here.

This input can be set for use with an RGB or component source (see page 17).

GPC1 (mini D-Sub 15pin)

Connect an analog RGB signal from a computer, etc. here. This input can be used for Input or Output (see page 24).

HPC3 (DVI 24pin)

Connect a digital signal (TMDS) from a source with a DVI output.

IRS-232C

Never connect any component to this connector without first consulting your Pioneer installation technician.

This connector is used for plasma display setup adjustments.

JREMOTE IN

Connect the remote cable* to the remote control’s remote jack to obtain wired remote control.

KREMOTE OUT

Connect the remote cable* to the REMOTE IN jack of the other display monitor to obtain wired remote control.

Information

For Y/CB/Cr, connect to the COMPONENT1 or PC2/ COMPONENT2 terminals.

For SCART, this unit provides three ways to connect:

·SCART1: Connect R/G/B and composite sync. to the PC2/COMPONENT2 terminals. (R, G, B and HD connector)

·SCART2: Connect R/G/B to the COMPONENT2 terminals and composite sync. to the VIDEO1 terminal.

·SCART3: Connect R/G/B and composite sync. to the PC1 terminal.

*The 1/8 Stereo Mini cable must be purchased separately.

Page 11
Image 11
Pioneer PDP-42MVE1 Rear View/ Terminal Board, EXT Speaker L and R, VIDEO1, 2, 3 BNC, RCA, S-Video, PC1 mini D-Sub 15pin