Pioneer PDP-42MVE1 manual  Screen settings,  ABL Link settings,  P. on Delay settings

English

Controls

SCREEN

The position of the image can be adjusted and flickering of the image can be corrected.

Example: Adjusting the vertical position

On “VIDEO WALL” menu, select “SCREEN”, then press the MENU/SET button.

The “SCREEN” screen appears.

On “V.POSITION” of “SCREEN” menu, adjust the position.

	SCREEN
SCREEN SIZE		:	4 : 3
V. POSITION
H. POSITION
V. SIZE
H. SIZE
AUTO PICTURE		:	OFF
PHASE
CLOCK				V.POSITION	+64
SEL.	ADJ.	EXIT RETURN

Information

SCREEN settings

These are the same functions as the SCREEN menu on page 16.

P. ON DELAY (Power on delay)

Use this function to activate power-on delay.

Turn on the AUTO ID before the following operations.

Example: Setting “ON”

On “P. ON DELAY” of “VIDEO WALL” menu, select “ON”.

	VIDEO WALL
DIVIDER	:	1
POSITION
DISP. MODE	:	NORMAL
AUTO ID	:	OFF
SCREEN

ABL LINK

Use this function to set a uniform brightness for each display.

Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9) before the following operations.

Example: Setting “ON”

On “ABL LINK” of “VIDEO WALL” menu, select “ON”, then press the MENU/SET button.

	VIDEO WALL
DIVIDER		:	1
POSITION
DISP. MODE		:	NORMAL
AUTO ID		:	OFF
SCREEN
P. ON DELAY		:	OFF
ABL LINK		:	ON
REPEAT TIMER		:	OFF
SEL.	ADJ.	EXIT RETURN

Information

ABL LINK settings

ON: Sets a uniform brightness for each screen in a video wall. This can be set only when a 2⋅2 or 3⋅3 video wall is selected.

OFF: Sets the individual screen brightness for each screen in a video wall.

*When this function is set “ON”, connect your plasma

displays with the remote cable (optional) in the order of the position numbers for the 2⋅2 video wall. See the drawing below.

*If there are changes in the DIVIDER or POSITION, the ABL LINK will automatically turn OFF.

OSD (On Screen Display)

P. ON DELAY		:	ON
ABL LINK		:	OFF
REPEAT TIMER		:	OFF
SEL.	ADJ.	EXIT RETURN

Information

P. ON DELAY settings

ON: Turns on the main power of each display after a delay time.

OFF: Turns on the main power of all displays at the

REMOTE IN

REMOTE OUT

No.1 No.2

No.4 No.3

Display 1

No.1 No.2

No.4 No.3

Display 4

REMOTE

OUT

REMOTE IN

REMOTE

OUT

REMOTE IN

No.1 No.2

No.4 No.3

Display 2

No.1 No.2

No.4 No.3

Display 3

REMOTE OUT

REMOTE IN

same time.

(Only for 16 and 25 screens)

MODE1: Turns on the main power of each display delayed.

MODE2: Turns on the main power of each display more delayed.

*Once this function has been set to “ON”, the POWER ON/OFF button on the remote control does not function except for the No.1 monitor.

By pressing the POWER ON button on the remote control the No.1 monitor will turn on and the others will be turned on one by one automatically.

*From the second monitor onward, neither the POWER button on the unit nor the POWER ON button on the remote control works. However, by pressing and holding the POWER ON button for more than 3 seconds, the monitor will be turned on.

*With the 3⋅3 video wall, connect the final display to the first display the same way as with 2⋅2 video wall.

Note: The remote control can be operated unless the IR REMOTE is set to “OFF”.

26

En