Pioneer PDP-42MVE1 manual Part Names and Function, Front View

Part Names and Function

Front View

English

7 6 5 4 1 3 2

qPower ( )

Turns the monitor’s power on and off.

wRemote sensor window

Receives the signals from the remote control.

eSTANDBY/ON indicator

When the power is on ............................. Lights green. When the power is in the standby mode ... Lights red.

rINPUT/EXIT Switches the input.

The available inputs depend on the setting of “BNC INPUT”, “RGB SELECT”, “D-SUB SELECT” and “DVI SET-UP”.

Functions as the EXIT buttons in the On-Screen Display (OSD) mode.

tLEFT/– and RIGHT/+

Functions as the CURSOR ( / ) buttons in the On- Screen Display (OSD) mode.

yVOLUME and

Adjusts the volume. Functions as the CURSOR (▲/ ▼) buttons in the On-Screen Display (OSD) mode.

uMENU/SET

Sets the On-Screen Display (OSD) mode and displays the main menu.

WARNING

The Power on/off switch does not disconnect the plasma display completely from the supply mains.

Part Names and Function

Note: This plasma monitor has the capasity to display images when connected to European DVD players with a SCART output signal, which is RGB with composite sync.

Your dealer can supply a special SCART cable, which will enable you to use the RGB with composite sync signal. To obtain the special cable as well as for further information, please contact your dealer.

Please refer to page 19 for selection of the correct mode in the on-screen display.

5

En