O p e r a t i o n
Cleaning lightweight flexible rugs
Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle(front of cleaner)and will prevent rug from clinging to cleaner.
Continue to lift front of cleaner so that when you have reached the edge, it is completely off the rug. Move cleaner back to start again, lower front of cleaner, and use only forward strokes.
Carpet height adjustment
Carpet and rug cleaning takes place at the nozzle (A).
When it is necessary to raise and lower the nozzle for various carpet pile heights, rotate the nozzle control dial
(B) to the desired setting.
For maximum cleaning performance, The following carpet height settings are recommended:
Lowest setting: for bare floors
Medium setting : for short and medium pile carpets Higher settings: for very deep pile carpet where easier pushing effort is desired, while maintaining good cleaning performance.
Note: If the cleaner is difficult to push, rotate knob to the next higher setting.
4