JVC RX-DV31 manual Basic Operations, Turning On the Power, Selecting the Source to Play

Basic Operations

Turning On the Power

Press STANDBY/ON on the front panel or AUDIO on the remote control.

STANDBY

STANDBY/ON

Notes:

•When you have connected some digital components using the digital terminals (see page 11), register the digital input terminal setting (see “Digital input (DIGITAL IN) terminals” on page 27) and digital input mode setting correctly (see “Selecting the Analog or

Digital Input Mode” on page 14). Source name and “DIGITAL” will be shown on the display when you select the source.

*You can use only one of the buttons—TAPE or CDR—whichever the source name is activated (see “Changing the Source Name” on page 13).

English

On the front panel From the remote control

The STANDBY lamp goes off and the illumination lamp lights up.

The current source name appears on the display.

•If “DVD” is the current source, “READING” appears while the unit is detecting the type of the loaded disc (see page 34).

–Playback starts automatically when you load some DVD VIDEO.

–“NO DISC” appears on the display when no disc is loaded.

To turn off the power (into standby)

Press STANDBY/ON on the front panel or AUDIO on the remote control again.

The illumination lamp goes off and the STANDBY lamp lights up.

Note:

•A small amount of power is consumed even in standby mode. To turn off the power completely, unplug the AC power cord.

Selecting the Source to Play

Press one of the source selecting buttons.

On the front panel

Adjusting the Volume

On the front panel

To increase the volume, MASTER VOLUME

turn MASTER VOLUME clockwise.

To decrease the volume,

turn MASTER VOLUME counterclockwise.

From the remote control

To increase the volume,

press and hold VOLUME +.

To decrease the volume,

press and hold VOLUME –.

CAUTION:

Always set the volume to the minimum before starting any source. If the volume is set at a high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

Notes:

•The volume level can be adjusted within the range of “0” (minimum) to “50” (maximum).

•When “DVD” is selected as the source with your TV turned on, the volume level indication appears on the TV.

From the remote control

DVD	Select the built-in DVD player.
DBS	Select the DBS tuner.
VCR	Select the VCR.
TV	Select the TV tuner.
TAPE/CDR	Select the cassette deck or the CD recorder
	(front panel ONLY).
TAPE*	Select the cassette deck (remote control
	ONLY).
CDR*	Select the CD recorder (remote control ONLY).
FM/AM	Select an FM or AM broadcast.

12