To change the transmittable signals for operating other manufacturers’ DBS tuner
1Press and hold DBS 
.
2Press DBS.
3Enter the manufacturer’s code using the number buttons (1 – 9, 0).
See the table on the right to find the code.
4Release DBS 
.
You can always perform the following operation:
DBS | Turns on or off the DBS tuner. |
After pressing DBS, you can perform the following operations on the DBS tuner:
CHANNEL +/– Changes the channels.
1 – 9, 0, 100+ Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0. For channel number 23, press 2, then 3. For channel number 135, press 100+, 3, then 5.
•TV RETURN will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.
Note:
•Refer also to the manual supplied for your DBS tuner.
5Try to operate your DBS tuner by pressing DBS 
.
When your DBS tuner turns on or off, you have entered the correct code.
If there is more than one code listed for your brand of DBS tuner, try each one until the correct one is entered.
Manufactures’ codes for DBS tuner
Manufacturer | Codes |
Echostar | 40 |
Gemini | 02 |
General Instrument | 01*, 41 |
Hamlin | 03 – 06 |
Hitachi | 42 |
Hughes | 43 |
Jerrold | 07 – 15 |
Macom | 16 – 18 |
Magnavox | 19 |
Oak | 20 – 22 |
Panasonic | 23, 24, 44 |
Philips | 25 – 30 |
Pioneer | 31, 32 |
Primestar | 45 |
RCA | 46 |
Samsung | 36 |
Scientific Atlanta | 33 – 35 |
Sony | 47 |
Tocom | 37 |
Toshiba | 48 |
Zenith | 38, 39 |
|
|
*“01” is the initial code.
Note:
•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
English
68
