JVC RX-DV31 Adjust the speaker output levels, For using test tone, Possible × Impossible Mode

Creating Realistic Sound Fields

English

Adjusting Surround Mode

Using Remote Control

When playing back the source with Surround mode, you can adjust the speaker output levels for Surround modes.

Once you have adjusted the Surround modes, adjustment is memorized for each source.

•You can also adjust Surround modes using the Choice menu (see pages 56 and 57) or buttons on the front panel (see page 29).

1Select and play back software you like.

2Activate and select Surround mode.

•When 2-channel source is played back, you can select Surround modes.

3Adjust the speaker output levels.

•To adjust center speaker, press CENTER +/–.*

•To adjust left surround speaker, press SURR L +/–.

•To adjust right surround speaker, press SURR R +/–.

•To adjust subwoofer, press SUBWFR +/–.

•To adjust the effect level, press EFFECT.**

The name for the item currently adjusted appears on the display.

Notes:

•You can adjust the speaker output levels for the activated speakers ONLY (the speaker indicators are lit on the display).

*You cannot adjust the output level of the center speaker when one of the DAP modes is activated.

**You can adjust the effect level only when one of the DAP modes is activated.

For using test tone

1Press TEST.

The playback sound stops during play.

“TEST L” starts flashing on the display and a test tone comes out of the speakers in the following order:

AL AUTO			PL	DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS	TA NEWS INFO	INPUT ATT
	SURROUND					SPK 1	2 RE	C
L	C	R	GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO		AUTO MUTING	AUTO	MODE
						A.POSITION
UBWFR LFE						kHz
S	S	RS				MHz
						VOL

		TEST L			TEST C			TEST R
(Left front speaker)				(Center speaker)				(Right front speaker)
			TEST LS				TSET RS
	(Left surround speaker)					(Right surround speaker)

2Adjust the speaker output level as follows:

•To adjust center speaker, press CENTER +/–.

•To adjust left surround speaker, press SURR L +/–.

•To adjust right surround speaker, press SURR R +/–.

Notes:

•You cannot adjust the speaker output levels if you have set the speaker information to “NO.”

•No test tone comes out of a speaker when its speaker information is set to “NO.”

•When you press EFFECT or SUBWFR +/–, the test tone stops.

3Press TEST to stop the test tone. The test tone stops.

•When no operation is done for about 1 minute, the test tone stops automatically.

Relation between Surround modes and adjustable items

◯: Possible ×: Impossible

Mode	Item	TEST	CENTER	SURR L	SURR R	SUBWOOFER	EFFECT
Dolby Digital		◯	◯	◯	◯	◯	×
DTS Digital Surround		◯	◯	◯	◯	◯	×
Dolby Pro Logic II		◯	◯	◯	◯	◯	×
DAP		◯	×	◯	◯	◯	◯
All Channel Stereo		◯	◯	◯	◯	◯	×

Note:

•You cannot adjust the speakers which are not used by the selected Surround mode.

33