JVC RX-DV31 manual Other operation buttons for the DVD player

To stop playback

Press 7.

The unit memorizes the point where you stop playback and the RESUME indicator lights up on the display (except when an audio CD is loaded).

While the RESUME indicator is lit on the display, you can start playback from the memorized point by pressing 3—Resume play (see “About Resume play” on page 19).

To remove the loaded disc

Press 0 on the front panel or OPEN/CLOSE on the remote control.

The disc tray opens.

After removing the disc, press the button again to close the disc tray

•If you press STANDBY/ON on the front panel or

AUDIO on the remote control while the disc tray is open, the disc tray closes automatically, then the unit is turned off.

7Other operation buttons for the DVD player

On the front panel

From the remote control

To stop playback temporarily

Press 8.

• Pressing 3 starts playback again.

To move back the playback position by 10 seconds (for DVD VIDEO only)

Press 3 during DVD VIDEO playback.

The unit moves the playback position about 10 seconds before the current position, then resumes playback.

To advance or reverse playback rapidly

•Press ¡ or 1 during playback (remote control ONLY). Each time you press ¡ (or 1), the unit advances (or reverses) playback, rapidly changing the playback speed as follows:

For DVD VIDEO:

x2 ] x5 ] x10 ] x20 ] x60

For DVD AUDIO/VCD/SVCD/CD: x2 ] x5 ] x10 ] x20

Pressing 3 resumes the normal playback.

•Press and hold ¢ or 4.

While you are pressing and holding ¢ (or 4), the unit advances (or reverses) playback 5 times as fast as the normal speed. When you press and hold ¢ (or 4) further, the playback speed changes up to 20 times as fast as the normal speed.

Releasing the button resumes the normal playback.

To locate the beginning of the chapter or track

Press ¢ or 4.

Press ¢ (or 4) to locate the beginning of the next (current or previous) chapter or track.

To locate the chapter or track using the number buttons

Press the number buttons (1 – 10, +10) to select the number of the desired chapter or track.

Ex.: To select 3, press 3.

To select 11, press +10, then 1.

To select 20, press +10, then 10.

English

18