JVC RX-DV31 manual Selecting the FM Reception Mode, Tuning in to a preset station, Mono

7Tuning in to a preset station

On the front panel

1Press FM/AM to select the band.

The last received station of the selected band is tuned in. The CONTROL buttons now work for tuner operations.

ANALOG DIGITAL AUTO		PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS	TA NEWS INFO	INPUT ATT
PPCM AUTO SURROUND				SPK 1	2 RE	C
DIGITAL L C	R	GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO	AUTO MUTING	AUTO	MODE
				A.POSITION

LPCM SUBWFR LFE	kHz
MPEG-2 AAC LS S RS	MHz
	VOL

Ex.: When selecting the FM band

2Press CONTROL ∞ (or 5) repeatedly until “< PRESET >” appears on the display.

ANALOG DIGITAL AUTO		PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS	TA NEWS INFO	INPUT ATT
PPCM AUTO SURROUND				SPK 1	2 RE	C
DIGITAL L C	R	GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO	AUTO MUTING	AUTO	MODE
				A.POSITION

LPCM SUBWFR LFE	kHz
MPEG-2AAC LS S RS	MHz
	VOL

3While “< PRESET >” remains on the display, press CONTROL 3 (or 2) to select a preset channel number you want.

•Pressing (or holding) CONTROL 3 increases the preset channel numbers.

•Pressing (or holding) CONTROL 2 decreases the preset channel numbers.

From the remote control

1Press FM/AM.

The last received station of the selected band is tuned in.

The number buttons now work for tuner operations.

2Press the number buttons to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 30, press +10, +10, then 10.

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station.

Before you start, remember...

There is a time limit in doing the following steps.

If the setting is canceled before you finish, start from step 1 again.

On the front panel

1While listening to an FM station, press CONTROL ∞ (or 5) repeatedly until “< FM MODE >” appears on the display.

ANALOG DIGITAL AUTO		PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS	TA NEWS INFO	INPUT ATT
PPCM AUTO SURROUND				SPK 1	2 RE	C
DIGITAL L C	R	GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO	AUTO MUTING	AUTO	MODE
				A.POSITION

LPCM SUBWFR LFE	kHz
MPEG-2 AAC LS S RS	MHz
	VOL

2While “< FM MODE >” remains on the display, press CONTROL 3 (or 2) to select “MONO.”

•Each time you press the button, FM reception mode alternates between “AUTO MUTING” and “MONO.”

AUTO MUTING Normally select this (initial setting). When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

MONO	Select to improve the reception (but
	stereo effect will be lost).
	In this mode, you will hear noise while
	tuning in to the stations. The AUTO
	MUTING indicator goes off from the
	display. (The STEREO indicator also
	goes off.)

To restore the stereo effect

Repeat step 1, then select “AUTO MUTING” in step 2.

From the remote control

1Press FM/AM to select an FM station.

2Press FM MODE.

•Each time you press the button, FM reception mode alternates between “AUTO MUTING” and “MONO.”

English

22