JVC RX-DV31 Speaker setting menu-SPK. Setting, Front SPEAKER, Center SPEAKER, Large, Small, None

Choice Menu Operations

English

7Speaker setting menu—SPK. SETTING

SPK. SETTING

SIZE

LEVEL

DISTANCE

CROSS OVER 100Hz

RETURN TO INITIAL

¶SIZE

Select this to enter the SIZE submenu.

SIZE
FRONT SPEAKER	LARGE
CENTER SPEAKER	SMALL
SURROUND SPEAKER SMALL
SUB WOOFER	NONE
RETURN

FRONT SPEAKER, CENTER SPEAKER, and

SURROUND SPEAKER

Select one of the following settings for each speaker:

LARGE	Select when the size of the cone
	speaker unit built in your speaker is
	greater than 12 cm.
SMALL	Select when the size of the cone
	speaker unit built in your speaker is
	smaller than 12 cm.
NONE	Select when you have not connected a
	speaker (not selectable for the front
	speakers).

¶LEVEL

Select this to enter the LEVEL submenu.

LEVEL
CENTER SPEAKER	0dB
SURROUND LEFT SPEAKER	0dB
SURROUND RIGHT SPEAKER	0dB
SUB WOOFER	–
TEST TONE
RETURN

CENTER SPEAKER, SURROUND LEFT SPEAKER, SURROUND RIGHT SPEAKER, and

SUB WOOFER

Adjust the speaker output level within the range of –10 dB to +10 dB for each speaker in 1 step intervals.

TEST TONE

Select this to start or stop test tone.

RETURN

Select this to return to SPK. SETTING menu.

Notes:

•When “NONE” is selected for the center speaker, surround speakers, and/or subwoofer on the SIZE menu, “–” appears instead of the current setting. In this case, you cannot adjust the output level of those speakers.

•You can adjust the output level for center speaker and/or surround speakers only when one of the proper Surround modes is activated (see page 32).

•When “NONE” is selected for the center and/or surround speakers on the SIZE menu, the test tone does not come out of those speakers.

SUB WOOFER

Select one of the following settings:

USE	Select when a subwoofer is connected.
NONE	Select when no subwoofer is used.

RETURN

Select this to return to SPK. SETTING menu.

Notes:

•If you have selected “SMALL” for the front speakers, you cannot select “LARGE” for the center and surround speakers.

•If you have selected “NONE” for subwoofer, you cannot select “SMALL” for the front speakers.

•You can take advantage of the speaker diagrams on the left part of the SPK. SETTING menu to set the speaker.

–The speaker diagram for the selected speaker is highlighted.

–The size of the speaker diagram is changed according to your settings.

¶DISTANCE

Select this to enter the DISTANCE submenu.

DISTANCE
FRONT SPEAKER	3.0m
CENTER SPEAKER	3.0m
SURROUND SPEAKER 3.0m
TEST TONE
RETURN

FRONT SPEAKER, CENTER SPEAKER, and

SURROUND SPEAKER

For each speaker, set the distance from the listening point within the range of 0.3 m to 9.0 m, in 0.3 m intervals.

TEST TONE

Select this to start or stop test tone.

RETURN

Select this to return to SPK. SETTING menu.

Speaker diagrams

Subwoofer

Front speakers

Center speaker

Notes:

•When “NONE” is selected for the center speaker and surround speakers on the SIZE menu, “–” appears instead of the current setting. In this case, you cannot adjust the speaker distance of those speakers.

•When “NONE” is selected for the center speaker and/or surround speakers on the SIZE menu, the test tone does not come out of those speakers.

Surround speakers

57