Samsung SU-2930 Series Assembling Par ts, Identifications of parts, Attaching the Handle, Front

Assembling Par ts

Identifications of parts

1-1
Front	Back

The assembled cleaner will look like the illustration to the left.

1.Handle

2.Power switch

3.Quick release cord hook

4.Post-Motor Filter

5.Crevice tool

6.Handle release

7.Carrying handle

8.Hose

9.Extension wand

10.Combination tool

11.Cyclone-Lever

12.Dirt Cup

13.Filter Cup

14.Upper Tank

15.Louvers

16.Hose Wand Base

17.Height Adjustment Dial

18.Hose Clip

19.Mini Turbo Brush

WARNING!

OPERATE THE VACUUM CLEANER ONLY AT THE VOLTAGE SPECIFIED ON THE NAMEPLATE.

Step 1. Attaching the Handle

1-2

Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body.

1-3

Insert the screw provided into the existing hole. Tighten the screw securely with a screwdriver.

Before securing the handle, please check that the handle is fitted to the vacuum body and make sure there’s no gap.

Step 2. Attaching the Hose and Tools

1-4	Line up the tabs on the 1-5
	base of the Twist Snap
	Hose with the
	corresponding notches
	on the hose collar as
	shown.

Slide the end of the hose wand with tabs into the Hose Wand Base.

1-6

Slide the extension wand and the crevice tool together into the storage clip.

1-7

Attach the Mini Turbo Brush by putting the rib at the bottom of Mini Turbo Brush on two hooks of Handle. Snap Mini Turbo Brush into place as shown.

2