O p e r a t i o n
2-3
ON-OFF Switch
1.To turn cleaner on, press the Power switch.
2.To the cleaner off, press the Power switch again.
Handle positions
The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating for general operation on carpet and floors; low for reaching under low furniture. Step on handle release pedal to lower handle.
Transporting cleaner
To move your cleaner from room to room, put the handle in upright position, tilt the cleaner back on its rear wheels and push forward.
Carrying handle
The cleaner can also be moved by using the carrying handle.
A |
B |
C |
D |
option |
E |
Cleaning Tool attachments
Attachment tools can be used to clean furniture or drapes, on stairs or in corners.
When using the attachments, ensure the vacuum cleaner is placed firmly on the floor with the handle in the upright position. Do not place the vacuum on top of furniture or steps as the brushroller may cause damage.
A. Combination tool:
Two types of cleaning tools are included in one attachment: rotate for desired tool.
Use brush side to dust furniture, blinds, books, lamps, shelves. Use upholstery side for curtains, draperies, cushions, fabrics.
B. Crevice tool:
Use in corners, on stairs, baseboards, and behind furniture.
C. Extension Wand:
Use with desired attachments and narrow wand for a longer reach.
D. Mini Turbo Brush :
Use rotating brush action for small areas such as stairs and upholstery.
Note: Press gently when using Mini Turbo Brush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating.
option
E. Wooden Floor Brush (Select Models):
Use for bare floors. Swivel head turns to get into tight spaces and fits under cabinets. Note: The Wooden Floor Brush does not store on board.
3
