Pioneer DEH-600BT Initial Settings Adjusting initial settings, Setting the date, OFF Clock

Section
04		Initial Settings
	Adjusting initial settings		4 Push MULTI-CONTROL up or down to
	1 Press SRC and hold until the unit turns		set the date.
			Pushing MULTI-CONTROL up will increase
	off.
			the selected day, month or year. Pushing
	2 Press MULTI-CONTROL and hold until		MULTI-CONTROL down will decrease the se-
			lected day, month or year.
	the initial setting menu appears in the dis-
	play.

3Turn MULTI-CONTROL to select one of the initial settings.

CLNDR (calendar)—CLOCK (clock)—

OFF CLOCK (off clock)—FM STEP (FM tuning step)—AUTO PI (auto PI seek)—WARNING (warning tone)—AUX (auxiliary input)— REAR SP (rear output and subwoofer control- ler)—EVERSCROLL (ever scroll)—TITLE (lan- guage selection)—BT AUDIO (Bluetooth audio)—BT MIC (microphone setting)— PIN CODE INPUT (pin code input)—

EDIT DEVICE NAME (device name edit)— BT INFO (Bluetooth version information)— BT RESET (Bluetooth reset)—

SOFTWARE UPDATE (software update)

# You can also perform the same operations by

pushing MULTI-CONTROL up or down.

# To cancel initial settings, press BAND/ESC.

Setting the date

The calender display adjusted in this mode ap- pears when the telephone source is selected or sources and the feature demo are off.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select CLNDR. CLNDR appears in the display.

3Push MULTI-CONTROL left or right to select the segment of the calendar display you wish to set.

Day—Month—Year

As you select segments of the calendar dis- play the segment selected will blink.

Setting the clock

Use these instructions to set the clock.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select CLOCK.

3Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Hour—Minute

As you select segments of the clock display, the selected segment blinks.

4Push MULTI-CONTROL up or down to put a clock right.

Note

You can match the clock to a time signal by pressing MULTI-CONTROL.

!If 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

!If 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

Turning the off clock display on or off

If the off clock display is turned on and the sources and the feature demo are off, the clock display appears on the display.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select

OFF CLOCK.

40 En