Pioneer DEH-600BT Audio Adjustments, Adjusting loudness, Adjusting equalizer curves

	Section
Audio Adjustments	03

VOCAL Vocal

CUSTOM Custom

FLAT Flat

SUPER BASS Super bass

!CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve set- ting is memorized in CUSTOM.

!When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.

1Use MULTI-CONTROL to select P. EQ. POWERFUL appears in the display.

If the equalizer curve has been previously se- lected, the curve of that previously selected will be displayed instead of POWERFUL.

2Push MULTI-CONTROL left or right to select an equalizer curve.

Each time MULTI-CONTROL is pushed left or right, equalizer curves are selected in the fol- lowing order:

POWERFUL—NATURAL—VOCAL—CUSTOM

—FLAT—SUPER BASS

Adjusting equalizer curves

The factory supplied equalizer curves can be adjusted to a fine degree (nuance control).

1Recall the equalizer curve you want to adjust.

See Recalling equalizer curves on the previous page.

2Push MULTI-CONTROL left or right to select the equalizer band to adjust. EQ-LOW (low)—EQ-MID (mid)—EQ-HI (high)

3Push MULTI-CONTROL up or down to adjust the equalizer curve.

+6 to –6 is displayed as the equalizer curve is increased or decreased.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-LOW/EQ-MID/ EQ-HI).

Level (dB)

Q=2N Q=2W

Center frequency Frequency (Hz)

1Use MULTI-CONTROL to select EQ.

2Push MULTI-CONTROL left or right to select a desired frequency.

Low: 40HZ—80HZ—100HZ—160HZ

Mid: 200HZ—500HZ—1KHZ—2KHZ

High: 3KHZ—8KHZ—10KHZ—12KHZ

3Push MULTI-CONTROL up or down to select the desired Q factor.

Q factor

2N—1N—1W—2W

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1 Display the audio menu.

Refer to Introduction of audio adjustments on the previous page.

2Use MULTI-CONTROL to select

LOUDNESS.

3Press MULTI-CONTROL to turn loudness

on.

Loudness level (e.g., MID) appears in the dis-

play.

# To turn loudness off, press MULTI-CONTROL again.

Audio Adjustments

En 37