Reverse/Invert Image Function
Projector | Remote control |
This projector is equipped with a reverse/invert image function which allows you to reverse or invert the pro-
POWER
ON/OFF LAMP
TEMP.2, 3
jected image for various applications.
Description of Projected Images
KEYSTONE
INPUT | AUTO SYNC | 2, 3 |
BACK | ENTER MENU | 1, 4 |
(GUI)
Selected item | Projected image |
Front | Normal image |
|
|
Ceiling+Front | Inverted image |
|
|
Rear | Reversed image |
|
|
Ceiling+Rear | Reversed and inverted image |
|
|
1Press MENU.
2Press ∂/ƒ to select “PRJ Mode”, and then press
ENTER.
3Press ∂/ƒ to select the desired projection mode, and then press ENTER.
4To exit from the GUI, press MENU.
• This function is used for the reversed image and ceiling- mount setups. See page 19 for these setups.
Special Mode Adjustment
Projector
| ON/OFF | LAMP |
|
POWER |
|
| |
|
|
| |
|
| TEMP. |
|
| KEYSTONE |
| |
INPUT |
| AUTO SYNC |
|
BACK |
| ENTER | MENU |
Remote control
2, 3
2, 4
1, 5
Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, since the projector cannot distinguish 640×480 signal resolution on computers or 480P on DTVs, select an appropriate mode on “Special Modes.”
1Press MENU.
2Press ∂/ƒ to select “Special Modes”, and then press ENTER.
Useful Features
(GUI)
3 Press ∂/ƒ to select the optimal resolution mode.
4Press ENTER to save the setting.
5To exit from the GUI, press MENU.
•When inputting DTV 480P signals, select “480P” in step 3 above.
