Selecting a Background Image
Projector | Remote control |
This function allows you to select the image displayed when no signal is being sent to the projector.
POWER
ON/OFF LAMP
TEMP.2, 3, 4
Description of Background Images
KEYSTONE
INPUT | AUTO SYNC | 2, 3 |
BACK | ENTER MENU | 1, 5 |
(GUI) On-screen Display
Blue | Blue screen |
None | Black screen |
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press
ENTER.
3Press ∂/ƒ to select “Background”, and then press ENTER.
4Press ∂/ƒ to select “Blue” or “None”.
5To exit from the GUI, press MENU.
Projector | Remote control |
Function with toggle switch to control the quantity of projected light. Select “ON” or “OFF” to decrease or
POWER
ON/OFF LAMP
TEMP.2, 3, 4
increase brightness, power consumption and fan noise.
Description of Power Save Modes
FeaturesUseful
KEYSTONE
INPUT | AUTO SYNC | 2, 3 |
BACK | ENTER MENU | 1, 5 |
(GUI) On-screen Display
ON | Quantity of light is 70%. | |
Power consumption is 200 W. | ||
| ||
|
| |
OFF | Quantity of light is 100%. | |
Power consumption is 230 W. | ||
|
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press
ENTER.
3Press ∂/ƒ to select “Power Save Mode”, and then press ENTER.
4Press ∂/ƒ to select “ON” or “OFF”.
5To exit from the GUI, press MENU.
•“Power Save Mode” is factory preset to “ON” .
•When selecting “OFF“ in “Power Save Mode”, fan noise is increased.
•Even when selecting “ON” in “Power Save Mode“, fan noise may increase if internal temperature rises enough to activate the cooling function.
