Sharp PG-C20XU Adjusting the Computer Image, Computer Image Adjustments INPUT 1 mode only, Enter

Computer Image Adjustments (INPUT 1 mode only)

Projector Remote control

Adjusting the Computer Image

POWER

ON/OFF LAMP

TEMP.2, 3, 4

When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of

Operation

KEYSTONE

INPUT	AUTO SYNC	2, 3
BACK	ENTER MENU	1, 5

(GUI) On-screen Display

the screen. Should this occur, adjust “Clock”, “Phase”, “H-Pos” and “V-Pos” for the optimum computer image.

Description of Adjustment Items

Selected item	Description
Clock	Adjusts vertical noise.
Phase	Adjusts horizontal noise (similar to tracking on your VCR).
H-Pos	Centers the on-screen image by moving it to the left or right.
V-Pos	Centers the on-screen image by moving it up or down.

•Computer image adjustments can be made easily by

pressing AUTO SYNC ( ). See page 28 for details.

(Select the desired computer input mode with INPUT.)

1Press MENU.

2Press ∂/ƒ to select “Fine Sync”, and then press

ENTER.

3Press ∂/ƒ to select a specific adjustment item, and then press ENTER.

4Press ∂/ƒ to move the mark of the selected adjustment item to the desired setting.

5To exit from the GUI, press MENU.

• To reset all adjustment items, select “Reset” on the “Fine Sync” menu screen and press ENTER.

E-29