Operation

Operating the Wireless Mouse from the Remote Control

You can use the remote control as a remote mouse.

Connecting the Remote Mouse Receiver

Connecting to the USB port on a PC or Macintosh

1Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer.

2 Connect the other end to the USB port on the remote mouse receiver.

USB mouse control cable QCNW-5680CEZZ

Remote mouse receiver RUNTK0694CEZZ

Use the USB port (PC or Macintosh) to connect the supplied

USB portUSB mouse control cable to the remote

mouse receiver.

Connecting to the PS/2 port on a PC

1Turn off the power of the PC.

2Connect one end of the supplied PS/2 mouse control cable to the corresponding terminal on the PC.

3 Connect the other end to the PS/2 port on the remote mouse receiver. 4 Turn on the power of the PC.

PS/2 mouse control cable QCNW-5113CEZZ

CAUTION

 

Remote mouse

 

receiver

 

RUNTK0694CEZZ

 

Use the PS/2 port

 

(PC) to connect the

PS/2 port

supplied PS/2 mouse

control cable to the

 

 

remote mouse

 

receiver.

Do not connect or disconnect the mouse control cables to or from the computer while it is on. This may damage your computer.

Do not connect both the PS/2 and USB mouse control cables to the remote mouse receiver.

The wireless mouse functions can be used to operate computers compatible with PS/2 or USB type mouse systems.

E-21

Page 22
Image 22
Sharp PG-C20XU operation manual Connecting the Remote Mouse Receiver, PS/2 port