Checking the Input Signal and the Lamp Usage Time
Projector | Remote control |
This function allows you to check the current input signal information and the accumulated lamp usage time.
POWER
ON/OFF LAMP
TEMP.2
1Press MENU.
KEYSTONE
INPUT | AUTO SYNC |
| 2 |
BACK | ENTER | MENU | 1 |
(GUI) On-screen Display
2Press ∂/ƒ to select “Options”, and then press ENTER. The current input signal information and the lamp usage time will be displayed.
•It is recommended that the lamp be replaced after approximately 900 hours of usage. See pages 40 and 41 for lamp replacement.
Automatic Power Shutoff Function
Projector | Remote control |
When no input signal is detected for more than 15 minutes, the projector will automatically shut off.
POWER
ON/OFF LAMP
TEMP.2, 3, 4
Description of Automatic Power Shutoff
KEYSTONE
INPUT | AUTO SYNC | 2, 3 |
BACK | ENTER MENU | 1, 5 |
(GUI) On-screen Display
ON | Power automatically shuts off after 15 minutes without | |
a signal being input. | ||
| ||
|
| |
OFF | Automatic Power Shutoff disabled. | |
|
|
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press
ENTER.
3Press ∂/ƒ to select “Auto Power Off”, and then press ENTER.
4Press ∂/ƒ to select “ON” or “OFF”.
5To exit from the GUI, press MENU.
Useful Features
•“Auto Power Off” is factory preset to “ON”.
