Selecting the On-screen Display Language
Projector | Remote control |
English is the preset language for the
POWER
ON/OFF LAMP
TEMP.2, 3
Chinese, Korean or Japanese.
KEYSTONE
INPUT | AUTO SYNC | 2, 4 |
BACK | ENTER MENU | 1, 5 |
(GUI)
1Press MENU.
2Press ∂/ƒ to select “Language”, and then press
ENTER.
3Press ∂/ƒ to select the desired language.
4Press ENTER to save the setting. The
5To exit from the GUI, press MENU.
Selecting the Video Input System Mode (INPUT 2 or 3 mode only)
Operation
Projector | Remote control |
The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode, if the selected system mode is not compatible with the
POWER
ON/OFF LAMP
TEMP.2, 3
connected audiovisual equipment.
KEYSTONE
INPUT | AUTO SYNC | 2, 4 |
BACK | ENTER MENU | 1, 5 |
(GUI)
1Press MENU.
2Press ∂/ƒ to select “Video System”, and then press ENTER.
3Press ∂/ƒ to select the desired video system mode.
4Press ENTER to save the setting.
5To exit from the GUI, press MENU.
•When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.
