Picture Adjustments
Projector | Remote control |
You can adjust the projector’s picture to your prefer- ences with the following picture settings.
POWER
ON/OFF LAMP
TEMP.2, 3, 4
Description of Adjustment Items
KEYSTONE
INPUT | AUTO SYNC | 2, 3 |
BACK | ENTER MENU | 1, 5 |
(GUI) |
INPUT 1 (RGB) mode |
Selected item | ƒ button | ∂ button |
|
|
|
Contrast | For less contrast | For more contrast |
Bright | For less brightness | For more brightness |
Red | For weaker red | For stronger red |
Blue | For weaker blue | For stronger blue |
Reset | All image adjustment items are returned to the factory preset | |
| settings. |
|
Color | For less color intensity | For more color intensity |
Tint | Skin tones become purplish | Skin tones become greenish |
Sharp | For less sharpness | For more sharpness |
•“Color”, “Tint” and “Sharp” do not appear in the INPUT 1 (RGB) mode.
•“Tint” does not appear when receiving “PAL”, “SECAM”, “PAL M”, “PAL N” or “PAL (60 Hz)” in the
Operation
| INPUT 1 (COMPONENT) mode |
|
|
|
|
| ||
|
| 1 Press MENU. |
|
|
|
|
| |
|
|
|
|
|
|
| ||
|
| 2 Press ∂/ƒ to select “Picture” in INPUT 1 (RGB) | ||||||
|
| mode, or to select “Picture1” or “Picture2” in | ||||||
|
| INPUT 1 (COMPONENT), INPUT 2 | ||||||
|
| INPUT 3 (VIDEO) mode, and then press ENTER. | ||||||
|
| 3 Press ∂/ƒ to select a specific adjustment item, | ||||||
|
| and then press ENTER. |
|
|
|
|
| |
|
| 4 Press ∂/ƒ to move the |
|
|
|
|
| mark of the selected |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
| adjustment item to the desired setting. | ||||||
|
| 5 To exit from the GUI, press MENU. | ||||||
|
| • To reset all adjustment items, select “Reset”, and then press | ||||||
|
| ENTER. |
|
|
|
|
| |
|
| • The adjustments can be stored separately in the INPUT 1, | ||||||
|
| INPUT 2 and INPUT 3 modes. |
|
|
|
|
| |
|
|
|
|
|
|
| ||
INPUT 2 |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
