Pioneer DEH-600BT operation manual Displaying system version for repair, 04Initial Settings

Section

04Initial Settings

#If an invalid character has been entered, sub- sequent characters are not displayed.

#If an invalid character has been entered in the

beginning, device name cannot be stored in memory.

Displaying system version for repair

Should this unit fails to operate properly and you consult your dealer for repair, you may be asked to indicate the system versions of this unit and of Bluetooth module. You can display the versions and confirm them.

1Display the initial setting menu. Refer to Adjusting initial settings on page 40.

2Use MULTI-CONTROL to select BT INFO. The system (microprocessor) version of this unit is displayed.

3Push MULTI-CONTROL left to switch to the version of the Bluetooth module of this

unit.

# Pushing MULTI-CONTROL right returns to the system version of this unit.

Resetting the Bluetooth wireless technology module

Bluetooth telephone and Bluetooth Audio data can be deleted. To protect personal infor- mation, we recommend deleting this data be- fore transferring the unit to other persons. The following settings will be deleted.

—phone book entries on the Bluetooth tele- phone

—preset numbers on the Bluetooth tele- phone

—registration assignment of Bluetooth tele- phone

—call history of Bluetooth telephone

—history of the most recently connected Bluetooth audio

1Display the initial setting menu. Refer to Adjusting initial settings on page 40.

2Use MULTI-CONTROL to select

BT RESET.

3Push MULTI-CONTROL right to show a confirmation display.

BT RESET:YES is displayed. Clearing memory

is now on standby.

# If you do not want to reset phone memory, press BAND/ESC.

4Press MULTI-CONTROL to clear the memory.

Updating the software about Bluetooth connection

This function is used to update this unit with the latest software. For about software and up- dating, refer to our website.

1Display the initial setting menu. Refer to Adjusting initial settings on page 40.

2Use MULTI-CONTROL to select

SOFTWARE UPDATE.

3Push MULTI-CONTROL up or down to select a appropriate group.

4Press MULTI-CONTROL to display the

data transfer mode.

# To finish the updating, follow the on-screen in- structions.

44 En