Option | Description |
|
|
Scan Setup | Restores all of the scan options to the factory |
| default. |
System Setup | Restores all of the system options to the factory |
| default. |
Network Setup | Restores all of the network options to the factory |
| default. |
Address Book | Clears all of the fax numbers entries stored in |
| memory. |
Sent Report | Clears all records of sent faxes. |
Fax RCV Report | Clears all records of received faxes. |
|
|
Network (CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185 FW only)
You may set up the network with the machine's display screen. Before doing that, you must have the relevant information concerning the type of network protocols and computer system you use. If you are not sure which setting to use, contact your network administrator to configure this machine to the network.
1.Press Menu on the control panel.
2.Press the left/right arrow until Network appears and press OK.
3.Press the left/right arrow until the setup option you want appears and press OK.
4.Press the left/right arrow until the setting you want appears and press OK.
5.Repeat steps 3 through 4, as needed.
6.Press Stop/Clear to return to ready mode.
Option | Description |
|
|
TCP/IP | Select appropriate protocol and configure |
| parameters to use the network environment. |
| There are lots of parameters to be set. If |
| you are not sure, leave as is, or consult the |
| network administrator. |
TCP/IP (IPv6) | Selects this option to use the network |
| environment through IPv6 (See "IPv6 |
| Configuration" on page 6). |
Ethernet Speed | Configure the network transmission speed. |
Wireless | Selects this option to use the wireless network |
| (See "Wireless network setup |
| |
Clear Setting | Reverts the network settings to the default |
| values. |
Network Info. | This list shows information on your machine’s |
| network connection and configuration. |
|
|
Menu overview
The control panel provides access to various menus to set up the machine or use the machine’s functions. These menus can be accessed by pressing Menu.
Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
Items | Option |
|
|
Fax Featureb | Darkness |
| Resolution |
| Scan Size |
| Multi Send |
| Delay Send |
| Priority Send |
| Forward |
| Secure Receive |
| Add Page |
| Cancel Job |
Fax Setupb | Sending |
| Redial Times |
| Redial Term |
| Prefix Dial |
| ECM Mode |
| Send Report |
| Image TCR |
| Receiving |
| Receive Mode |
| Ring To Answer |
| Stamp RCV Name |
| RCV Start Code |
| Auto Reduction |
| Discard Size |
| Junk Fax Setup |
| DRPD Mode |
| Change Default |
| Resolution |
| Darkness |
| Scan Size |
| Auto Report |
Copy Feature | Scan Size |
| Reduce/Enlarge |
| Darkness |
| Original Type |
| Layout |
| Adjust Bkgd. |
| Gray Enhance |
| Eco Copy |
|
|
