basic setup
After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter gives you
This chapter includes:
•Altitude adjustment
•Changing the display language
•Setting the date and time
•Changing the clock mode
•Changing the default mode
•Setting sounds
Altitude adjustment
The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print.
Before you set the altitude value, determine the altitude where you are.
4,000 m
(13,123 ft)
1 |
|
|
3,000 m |
|
|
(9,842 ft) |
|
|
2 |
|
|
2,000 m |
|
|
(6,561 ft) |
|
|
3 | 1 | High 3 |
1,000 m | ||
(3,280 ft) | 2 | High 2 |
4 | 3 | High 1 |
0 | 4 | Normal |
1.Ensure that you have installed the printer driver with the provided Printer Software CD.
2.
3.Click Printer Setting.
If your machine is connected to the network, you can set the altitude via SyncThru™ Web Service.
4.Click Setting > Altitude Adjustment. Select the appropriate value from the
You can also set the altitude in System Setup > Machine Setup > Altitude Adj. option on the machine’s display.
Changing the display language
To change the language that appears on the display, follow the steps below.
•Entering characters using the number keypad
•Using the save modes
•Setting the default paper
•Setting job timeout
•Setting the humidity mode
1.Press Menu on the control panel.
2.Press the left/right arrow until System Setup appears and press OK.
3.Press the left/right arrow until Machine Setup appears and press OK.
4.Press the left/right arrow until Language appears and press OK.
5.Press the left/right arrow to display the language you want.
6.Press OK to save the selection.
7.Press Stop/Clear to return to ready mode.
Setting the date and time (CLX-3185FN/CLX-3185FW only)
When you set the time and date, they are used in delay fax and delay print. They are printed on reports. If, however, they are not correct, you need to change it for the correct time being.
If the machine’s power is cut off, you need to reset the correct time and date once the power has been restored.
1.Press Menu on the control panel.
2.Press the left/right arrow until System Setup appears and press OK.
3.Press the left/right arrow until Machine Setup appears and press OK.
4.Press the left/right arrow until Date & Time appears and press OK.
5.Enter the correct time and date using left/right arrow or numeric keypad. Month = 01 to 12
Day = 01 to 31
Year = requires four digits Hour = 01 to 12
Minute = 00 to 59
You can also select AM or PM by using the number keypad.
6.Press OK to save the selection.
7.Press Stop/Clear to return to ready mode.
Changing the clock mode (CLX-3185FN/CLX-3185FW only)
You can set your machine to print out the time on your fax using either a
1.Press Menu on the control panel.
2.Press the left/right arrow until System Setup appears and press OK.
