4.Pull the waste toner container out of the machine using the handle.
5.Pull the imaging unit out of the machine using the groove on the front of the imaging unit.
Do not touch the green surface of the drum located in the imaging unit. Use the handle on the cartridge to avoid touching this area.
6.With a dry and
•If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric.
•If your machine or its surrounding is contaminated with toner, we recommend you use a cloth or tissue dampened with water to clean. If you use a vacuum cleaner, toner blows into the air then might be harmful if inhaled.
After cleaning, let the machine to dry completely.
7.Holding the groove on the front of the imaging unit, push imaging unit into the machine.
Do not touch the green surface of the drum located in the imaging unit. Use the handle on the cartridge to avoid touching this area.
8.Insert the waste toner container into position and then push it to make sure that it is firmly seated in place.
9.Slide four toner cartridges back into the machine.
10.Reinstall all the compartments into the machine and close the front door.
If the front door is not completely closed, the machine will not operate.
11.Plug in the power cord and turn the machine on.
