paper in the tray" on page 4).
•Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray.
•Do not remove paper from the tray while your machine is printing.
•Flex, fan, and straighten paper before loading.
•Do not use creased, damp, or highly curled paper.
•Do not mix paper types in a tray.
•Use only recommended print media (See "Setting the paper size and type" on page 6).
•Ensure that the recommended side of the print media is facing up in the tray.
Clearing original document jams (CLX-3185FN/CLX-3185FW only)
When an original document jams in the document feeder, a warning message appears on the display.
To avoid tearing the document, remove the jammed document slowly and carefully.
To prevent document jams, use the scanner glass for thick, thin or mixed
1.Remove any remaining pages from the document feeder.
2.Open the document feeder cover.
3.Gently remove the jammed paper from the document feeder.
If you see no paper in this area, go to step 5.
4.Close the document feeder cover. Reload the pages you removed, if any, in the document feeder.
5.Open the scanner lid.
6.Seize the misfeed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands.
1
1 scanner lid
7.Close the scanner lid. Load the removed pages back into the document feeder.
Clearing paper jams
When a paper jam occurs, the warning message appears on the display screen. Refer to the table below to locate and clear the paper jam.
Message | Location of Jam | Go to |
|
|
|
Paper jam | In the paper feed area | See "In the tray" on |
in Tray 1 | and inside the machine | page 3. |
|
|
|
Paper jam | Inside the machine | See "In the fuser unit |
inside machine |
| area" on page 3. |
|
|
|
Paper jam | Inside the machine and in | See "In the paper exit |
in exit area | the paper exit area | area" on page 4. |
|
|
|
