Asante Technologies IC36240 Using CLI Command History, Using the No and Default Forms of Commands

Page 32

4.6 Using CLI Command History

The CLI user interface provides a history or record of commands that you have entered. This feature is particularly useful for recalling long or complex commands or entries, including access lists. To recall commands from the history buffer, use one of the following commands:

Keystrokes/Command	Purpose

Press Ctrl-Por the up arrow key	Recall commands in the history buffer, beginning with the most
	recent command. Repeat the key sequence to recall successively
	older commands.

Press Ctrl-Nor the down arrow key	Return to more recent commands in the history buffer after recalling
	commands with Ctrl-P or the up arrow key. Repeat the key
	sequence to recall successively more recent commands.

show history	While in EXEC mode, list the last several commands entered.

4.7 Using the No and Default Forms of Commands

Almost every Switch configuration command has an opposite no form that negates or reverses a command. In general, the no form is used to disable a function that has been enabled. To re-enable a disabled function, or to enable a function that is disabled by default, use the command without the no keyword. For example, Address Resolution Protocol (ARP) is enabled by default. Specify the command no arp to disable the ARP table; to re-enable the ARP table, use the arp command.

4.8 Using Command-Line Editing Features and Shortcuts

A variety of shortcuts and editing features are enabled for the CLI command-line interface. The following subsections describe these features:

•Moving Around on the Command Line

•Completing a Partial Command Name

•Editing Command Lines that Wrap

•Deleting Entries

•Scrolling Down a Line or a Screen

•Redisplaying the Current Command Line

•Transposing Mistyped Characters

•Controlling Capitalization

32

Asante IntraCore IC36240

User’s Manual

Image 32

Contents IntraCore IC36240 Series Layer 2+ Gigabit Ethernet Switch User’s Manual IntraCore IC36240Table of Contents Password Service Password-Encryption Snmp Configuration Commands Trunk Ieee 802.1q Technical Support and Warranty Features IntroductionPackage Contents Front and Back Panel DescriptionsLEDs LEDManagement and Configuration Console InterfaceSafety Overview Hardware Installation and SetupInstallation Overview Installing into an Equipment Rack Recommended Installation ToolsPower Requirements Environmental RequirementsEquipment Rack Guidelines Installing the Optional External Power SupplySFP Mini Gbic Ports 1 10/100/1000BaseT Ports Cabling Procedures Connecting PowerConnecting to the Network Gigabit Ethernet Ports Cabling Procedures Pin Number Pair Number & Wire ColorsAsante IntraCore IC36240 Initial Software Setup Connecting to a ConsoleConnecting to a PC User Access Verification PasswordEnable Password Passwords and Privileges CommandsPrivileges Commands Password Service Password-EncryptionLogin Security Configuring an IP AddressUsername Command Password and login CommandsRestoring Factory Defaults System Boot ParametersSetting a Default IP Gateway Address Switchconfig# ip default-gatewayUnderstanding the Command Line Interface CLI User Top User Exec ModeAccess Each Command Mode Document ConventionsPrivileged Top Privileged Exec Mode Command Show ? PurposeGlobal Configuration Mode Command Exit End Ctrl-Z Purpose Switch# configureInterface Configuration Mode Spanning-Tree Configuration ModeSpanning-tree mst configuration Advanced Features Supported within the Command ModeVlan Configuration Mode Command Help Purpose Example of Context Sensitive HelpChecking Command Syntax Switch# configure ?Using CLI Command History Using the No and Default Forms of CommandsUsing Command-Line Editing Features and Shortcuts Keystrokes/Command PurposeKeystrokes Purpose Moving Around on the Command LineCompleting a Partial Command Name Editing Command Lines That Wrap Scrolling Down a Line or a Screen Redisplaying the Current Command LineDeleting Entries Keystrokes Transposing Mistyped CharactersControlling Capitalization Managing the System and Configuration Files Setting the System ClockSwitch# clock ? Switch# clock set 092930 28 January Switch# reload crChanging the Password Testing Connections with Ping TestsSpecifying the Hostname Enabling the System LogManaging Configuration Files Displaying the Operating ConfigurationConfiguring from the Terminal Switch# show running-configCopying Configuration Files to a Network Server Newname# copy running-config startup-configSwitch# copy startup-config ? Switch# copy running-config tftp//192.168.0.1/my-config Switch# copy running-configSwitch# copy running-config Tftp Configuring Snmp AuthenticationAccess Control Switch# copy tftp//192.168.123.59/my-confg running-configSupport Create or Modify Access Control for Snmp CommunitySecurity Levels Command Purpose Snmp-server community string view Establish the Contact and Location of the Snmp AgentConfiguring Spanning Tree Snmp Configuration CommandsSpanning Tree Parameters Spanning-tree mst?Spanning Tree Port Configuration Rapid Spanning Tree Protocol RstpPort Priority Port Path CostConfiguring Switch/Bridge Priority Switchconfig# spanning-tree priority priorityRapid Convergence Enabling Rapid Spanning TreeConfiguring Link Type Configuring an Edge PortConfiguring Port Path Cost Configuring Port PriorityMultiple Spanning-Tree MST Configuring Vlan VlanShow mac-address-table Switchconfig# mac-address-table aging-timeMAC Address Table Class Address or Range Status Configuring IPAssign IP Addresses to Switch Establish Address Resolution Define a Static ARP CacheConfiguring Igmp Managing IP Multicast TrafficIgmp Overview Forwarding Unknown Multicast PacketsUsing Access Lists Switchconfig-if-veth1#ip igmp query-intervalCommand Purpose Ip igmp query-max-response-time Host-query messagesUsing a Classification ACL Asante IntraCore IC36240 Create a Standard Access List Switchconfig# mac access-list standard Create a MAC Access ListCreate an Expanded Access List Access-list 101 ? Access-list 101 deny ?Access-list 101 deny tcp ? Access-list 101 deny tcp 192.168.123.0 0.0.0.255 ?Creating an Access List with a Name Applying an Access List to an InterfaceAccess-list ? Access-list standard ?Configuring Common Access Lists Switchconfig# access-list 110 permit udp any any eqAccess-list 101 deny ip any any Vlan Configuration Creating or Modifying a VlanDeleting a Vlan Switch# show vlanSwitchconfig-vlan#port-member delete eth Trunk Ieee 802.1q Static AccessVlan Port Membership Modes Command Purpose Switchconfig# vlan dot1q tag native Switchconfig# endQuality of Service Configuration Configuring Weighted Fair QueuingMonitoring Weighted Fair Queuing Lists Priority QueuingConfiguring Traffic Shaping for an Interface Traffic ShapingDefining the Priority List Monitoring Priority Queuing ListsConfiguring Rate Limit Configuring Traffic Shaping for an Access ListMonitoring the Traffic Shaping Configuration Generic Traffic Shaping ExampleAsante IntraCore IC36240 Configuring the Switch Using the GUI Main Configuration MenuInformation Screens Front Panel Information ScreenAssign IP Addresses to Switch General Information ScreenClass Address or Range Status Port Configuration Menu Individual Port Configuration ScreenAsante IntraCore IC36240 Press go Spanning Tree Protocol Configuration STP Port Configuration Global STP Bridge Configuration Snmp Configuration Asante IntraCore IC36240 Address Table Screen Asante IntraCore IC36240 Asante IntraCore IC36240 Vlan Configuration Asante IntraCore IC36240 Click Apply Igmp Configuration Asante IntraCore IC36240 Asante IntraCore IC36240 Web CLI Screen System Clock Menu Save Appendix a Basic Troubleshooting Problem Possible SolutionsAppendix B Specifications Physical CharacteristicsEnvironmental Range PerformanceTechnical Support and Warranty Standards ComplianceAppendix C FCC Compliance and Warranty Statements FCC Compliance Statement Important Safety InstructionsIntraCare Warranty Statement Appendix D Online Warranty Registration Access List IndexIgmp LED Safety Priority Queuing Vlan