PMI - Phoenix P5 manual Getting Acquainted

Getting Acquainted

One of the ideas behind the P5 system is to tailor the system to your needs to avoid unnecessary expense. The P5 Basic (Board only) system includes the sound board (pictured below), connectors C1 which connects the speaker and power leads and C2 which is the computer access jack. We also offer the P5 as a kit which includes the sound board with a speaker and all connectors (C1, C2 and C3) appropriate to the locomotive.

Additional components available include: volume switch [6001-05], volume switch with reed switch[6020-05], volume switch with reed switch and bare leads for Board Trigger 2, volume switch with bare leads for Board Trigger 1, and volume switch with bare leads for Board Triggers 1 & 2.

There are 3 connectors on the P5 board. The chart on the following page shows the pin out for each. This chart also details the length and coloring of the wire leads if you order the generic plugs.

The Sound Board & Connectors

		1
1		2
2		3
		4
C1 43			C2
		65
5		7
6		8
7		9
		10
4	3	2 1

C3

August 2008

- 4 -