APC 110 VAC, SC620, 620 VA, 420 VA user manual User Configurable Items, UPS ID Upsiden

4:USER CONFIGURABLE ITEMS

NOTE: SETTINGS ARE ADJUSTED THROUGH POWERCHUTE BUSINESS EDITION SOFTWARE

FUNCTION		FACTORY		USER SELECTABLE		DESCRIPTION
		DEFAULT		CHOICES
Automatic		Every 14 days		Every 7 days		Set the interval at which the UPS will
Self-Test		(336 hours)		(168 hours),		execute a self-test.
				Every 14 days
				(336 hours),
				On Startup Only,
				No Self-Test
UPS ID	UPS_IDEN		Up to eight charac-			Uniquely identify the UPS, (i.e. server
				ters (alphanumeric)		name or location) for network man-
						agement purposes.
Date of Last		Manufacture Date		mm/dd/yy		Reset this date when you replace the
Battery						battery module.
Replacement
Minimum Capacity		0 percent		0, 15, 50, 90 percent	Specify the percentage to which batter-
Before Return from						ies will be charged following a low-
Shutdown						battery shutdown before powering
						connected equipment.
Voltage Sensitivity		High		High sensitivity,		Note: In situations of poor power qual-
The UPS detects				Medium sensitivity,		ity, the UPS may frequently transfer to
				Low sensitivity		battery operation. If the connected
and reacts to line
						equipment can operate normally under
voltage distortions
						such conditions, reduce the sensitivity
by transferring to
						setting to conserve battery capacity
battery operation to
						and service life.
protect connected
equipment.
Alarm Delay After		5 seconds	5 second delay,			Set the delay to avoid alarms for minor
Line Fail				30 second delay,		power glitches.
				At low battery
				condition,
				No alarm
Shutdown Delay		60 seconds	60, 180, 300, 600			Set the interval between the time when
				seconds		the UPS receives a shutdown com-
						mand and the actual shutdown.

5