APC Comprehensive Guide to Power Supply and Replacement Battery for BR1300G
Page 4

Front Panel Buttons and Display Interface

Use the three buttons on the front panel of the Back-UPS and the display interface to configure the Back-UPS.

Front panel

Mute button

Power On/Off button Display button

Display interface

bu109a

On Line—The Back-UPS is supplying conditioned utility power to connected equipment

Power-Saving—Master and Controlled outlets are enabled, saving power when the master device goes into sleep or standby mode

Load Capacity—The load is indicated by the number of sections illuminated, one to five. Each bar represents 20% of the load.

Battery Charge—The battery charge level is indicated by the number of sections illuminated. When all five blocks are illuminated, the Back-UPS is at full charge. When one block is filled, the Back-UPS is near the end of its battery capacity, the indicator will flash and the Back-UPS will beep continuously.

Overload—The power demand from the load has exceeded the capacity of the Back-UPS.

Event—The event counter shows the number of events that occurred that caused the Back-UPS to switch to on-battery operation.

Automatic Voltage Regulation—The Back-UPS can compensate for high or low input voltage.

When illuminated, the Back-UPS is compensating for low input voltage.

When illuminated, the Back-UPS is compensating for high input voltage.

In—Input voltage.

Out—Output voltage.

System Faults—The system has a fault. The fault number will illuminate on the display interface. See “System Faults” on page 5.

Mute—If the line through the speaker icon is illuminated, the audible alarm has been turned off.

Replace Battery—The battery is not connected or is nearing the end of its useful life. Replace the battery.

On Battery—The Back-UPS is supplying battery backup power to the connected equipment, it will beep four times every 30 seconds.

4

Back-UPS® Pro Installation and Operation

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Connect the battery InventorySafetyInstall PowerChute Personal Edition Software Connect the equipment Battery Backup and Surge Protected outletsMaster and Controlled outlets Power-Saving Function Power-Saving DisplayOperation Unit sensitivityFront Panel Buttons and Display Interface Front panelSystem Faults If these icons are This may be the problem IlluminatedAudible Warnings F01Function Button Quick-Reference Function Button TimingDescription SecondsTroubleshooting Problem Possible Cause Corrective ActionSpecifications Replacement BatteryService Warranty

BR1500G, BR1300G, 1300 specifications

The APC 1300, BR1300G, and BR1500G are part of the APC Back-UPS series, designed to provide reliable backup power and surge protection for a variety of electronic devices. These uninterruptible power supplies (UPS) are essential for ensuring continuous operation in situations where power interruptions can lead to data loss or equipment damage.

Starting with the APC 1300, this model offers a compact design while delivering 1300 VA of power. Its internal battery provides ample run-time for critical devices, ensuring that users can save their work and safely shut down equipment during a power failure. The LCD display provides real-time information on power status, battery level, and load capacity, allowing for easy monitoring.

Next, the BR1300G enhances the capabilities of the APC series with its features tailored for home and small office environments. Delivering 1300 VA of power, it also incorporates Automatic Voltage Regulation (AVR) technology, which corrects minor voltage fluctuations without using the battery, improving battery life and ensuring consistent power delivery. The BR1300G is equipped with multiple outlets, allowing users to connect various devices, and features USB connectivity for easy management and monitoring via compatible software.

The BR1500G represents a more advanced option, providing 1500 VA of power. This model also incorporates AVR technology and offers enhanced run-time, making it suitable for larger systems. Its LCD panel provides a comprehensive overview of the UPS status, while the energy-efficient design ensures reduced power consumption. The BR1500G also boasts additional outlets, including a few which are specifically designed for high-voltage devices, making it an ideal choice for small to medium-sized businesses.

All three models feature an intuitive interface, ensuring ease of use for individuals unfamiliar with UPS systems. They are built with high-quality components that provide robust protection against power surges and spikes, which can otherwise lead to equipment damage. Moreover, the compact form factor of each UPS allows for flexible placement within any environment.

In summary, the APC 1300, BR1300G, and BR1500G deliver essential backup power solutions with advanced features and robust technologies. Their impressive specifications make them versatile options for both home and business users seeking to protect their valuable electronic devices from unforeseen power issues.
Top Page Image Contents