NOTE: SETTING THESE ITEMS REQUIRES SOFTWARE, OPTIONAL HARDWARE, OR
CONFIGURATION IN TERMINAL MODE.
FUNCTION | FACTORY | USER SELECTABLE | DESCRIPTION | |
DEFAULT |
| CHOICES | ||
|
|
| ||
Output Frequency | Automatic | 50 | ± 3 Hz, | Sets the allowable output frequency of the |
|
| 50 | ± 0.1 Hz, | UPS. Whenever possible, the output fre- |
|
| 60 | ± 3 Hz, | quency tracks the input frequency. Auto- |
|
| 60 | ± 0.1 Hz | matic setting allows 50 |
|
|
|
| depending on the input frequency. |
|
|
|
| |
Unit Position | Tower | Rack Mount | The operating configuration of the UPS. | |
|
|
|
| Optional Rail Kit SUOLRK is required to |
|
|
|
| convert to rack mount configuration. |
|
|
|
| |
Number of | 1 | Number of con- | Defines number of battery packs for proper | |
Battery Packs |
| nected battery | runtime prediction. One battery pack is | |
|
| packs. | equivalent to 864VAh (48V x 18Ah). | |
|
|
|
|
|
TERMINAL MODE
Terminal mode is a menu driven interface that allows for enhanced configuration of the UPS. This interface can be accessed using a computer and a common serial communication application, such as Hyperterminal. To enter and use the Terminal Mode:
1.Connect a computer to the UPS using the cable supplied with your UPS.
2.Launch a standard serial communication application, such as Hyperterminal.
3.Specify the communications port (comm. port) to which you have connected.
4.Set the following properties: 2400 baud, 8 data bits, no parity, one stop bit, and no flow control.
5.Press the enter or return key.
6.Follow the instructions on the screen to continue in Terminal Mode.
9 |