REAR PANEL
TVSS Ground
Input Plug
Computer Interface Port
Fan
External Battery Connector Port
Outlets
BASIC CONNECTORS
Computer Inter-
face Port
TVSS Screw
Power management software and interface kits can be used with the UPS. Use only interface kits supplied or approved by APC. If used, connect the interface cable to the
Use the APC supplied cable to connect to the Computer Interface Port. DO NOT use a standard serial interface cable since it is incompatible with the UPS connector.
The UPS features a transient voltage
External Battery Connector Port
Input
Circuit Breaker
External battery packs can be obtained to connect to your UPS and give longer runtime during power outages. If used, unscrew the protective plate from in front of the connector port and insert the cable supplied with the bat- tery pack into the connector port. Battery Packs can be daisy chained to- gether to achieve desired run time.
To connect optional external battery pack(s) to the UPS, refer to the Smart- UPS RT Battery Pack User’s Manual for instructions. This
If the plunger on the circuit breaker pops out, reduce the load on the UPS by unplugging equipment and press the plunger in.
11 |