Adjusting the ATS-1, Wall Mounting | Phase Technology manual

ADJUSTING THE ATS-1

The ATAS-1 comes with a convenient stand/mount . A ball at the top of the post ﬁts into a socket molded into the back of the speaker. A retaining collar holds the ball in place in the socket providing adjustment of the angle of the speaker, permitting the speaker to be aimed at the ideal listening area. The retaining collar has three allen (hex) type screws to secure the speaker angle. An allen wrench is provided with each speaker to loosen and tighten the screws.

Note: Always loosen the screws on the retaining collar before you attempt to change the angle of your speaker on the bass. Failure to do so may result in damage to the post.

The screws in the retaining collar may be loosened by inserting the allen wrench into the screw head and turning the screws in a counter-clockwise direction. Once you have determined the desired angle, tighten the retaining screws by turning them in the clockwise direction until snug. Avoid over-tightening the retaining screws.

WALL MOUNTING

The base assembly is pre-drilled for fastening to a shelf, wall or ceiling. Before mounting the ATS-1 to a wall or ceiling, it is important to consider the surface material on which the speaker will be mounted. If you intend to mount the speaker to wood, traditional 1” long wood screws will secure the speaker properly. Mounting to stucco, plaster or drywall will require additional measures to properly secure the speaker to one of these surfaces. Consult your Phase Technology dealer for assistance.

You will ﬁnd it much easier to mount the base if you ﬁrst remove the speaker from the mounting post. To remove the speaker from the post, ﬁrst place the speaker face down on a soft surface such as carpet or a hand towel. The speaker is secured to the mounting post by three allen head screws located in the retaining collar. Using the allen wrench supplied with the ATS-1, remove the three screws. You now have clear access to the mounting holes in the base. With the speaker removed from the base, use the base as a template to locate the desired speaker placement. Hold the base at the location at which the speaker is to be mounted, then mark the mounting holes with a pencil. Secure the base to the mounting surfaces with the appropriate screws.

ATS-1 specifications

The Phase Technology ATS-1 is a cutting-edge loudspeaker designed for those who seek high-performance audio in both residential and commercial environments. Renowned for its exceptional sound quality and innovative technology, the ATS-1 has garnered attention among audio enthusiasts and professionals alike.

One of the standout features of the ATS-1 is its unique acoustic design. The loudspeaker incorporates a proprietary phased array technology, which enhances audio clarity and spatial imaging. This design allows for a more immersive listening experience, as it creates a wider soundstage and precise localization of sound sources. Whether used in a home theater, music reproduction, or as part of a professional audio setup, the ATS-1 delivers crystal-clear audio across a variety of genres.

The ATS-1 is equipped with a high-performance woofer and a sophisticated tweeter, ensuring a seamless integration of low, mid, and high frequencies. The woofer is designed to provide deep, controlled bass response while the tweeter reproduces the upper frequencies with incredible detail and transparency. This dual-driver configuration allows the ATS-1 to handle a wide dynamic range, making it suitable for both quiet passages and loud, impactful moments.

In addition to its impressive audio performance, the ATS-1 features advanced connectivity options. It is compatible with a range of audio sources, including traditional wired connections and modern wireless protocols. This versatility makes it easy to integrate into various audio systems, providing flexibility for users with different needs.

Durability is another characteristic of the ATS-1. Constructed with high-quality materials and designed to withstand the rigors of daily use, this loudspeaker is built to last. Its elegant design not only enhances its durability but also allows it to blend seamlessly into any environment, making it an aesthetic addition to any space.

Overall, the Phase Technology ATS-1 represents a perfect balance of advanced technology, superior sound quality, and durability. Whether for personal listening or professional audio applications, the ATS-1 stands out as a premier choice for those who demand excellence from their audio equipment. The combination of its innovative features and stylish design ensures that the ATS-1 delivers an unparalleled listening experience that will satisfy even the most discerning audiophiles.