Specifications, Rubber Feet | Phase Technology ATS-1 instruction

Note: For ceiling or wall mounting, it is recommended to center the base on a stud or wood frame member within your structure whenever possible. Once the base is properly secured, the speaker may be replaced on the mounting post.

Before you replace the speaker on the mounting post, connect the speaker wire to the terminals on the back of the speaker. Once you have connected the wire, place the speaker on the mounting post and replace the retaining collar and screws using the allen wrench. Hold the speaker at the desired angle and tighten the screws. Avoid over- tightening the screws. Always loosen the retaining screws before attempting to change the speaker angle.

RUBBER FEET

Peel-and-stick rubber feet are provided for the bottom of the base. It is recommended that the feet be applied to the base when using the ATS-1 on a shelf of other ﬂat surface to prevent marring the surface and to prevent the ATS-1 from sliding due to vibration.

CARING FOR YOUR SPEAKERS - OUTDOOR USE

Your ATS-1 speakers are engineered for both indoor and outdoor use and operation. Random water hitting the speaker will not damage your ATS-1, making it ideally suited for placement in close proximity to swimming pools and spas. The ATS-1 is not intended for use underwater, however.

Ordinary dust and dirt accumulation will not harm the ATS-1. If you wish to clean the ATS-1, household glass cleaning solution sprayed on a paper towel may be used for light cleanup. For heavier stains, a soap and water solution applied with a rag or sponge should remove the dirt and stains. Avoid spraying the ATS-1 with a high-pressure hose.

SERVICE ISSUES AND WARRANTY

Phase Technology has an uncompromising commitment to quality assurance. In the unlikely event that a problem occurs with your ATS-1, please contact your Phase Technology dealer. Your new ATS-1 comes with a warranty to protect you, the original purchaser, for a period of ten years again defects in material and workmanship. Please refer to the warranty card included with this manual.

SPECIFICATIONS

Tweeter	1” soft dome

Woofer	4” mineral ﬁlled cone with butyle rubber surround

Shielding	Video shielded

Crossover	12 dB per octave @ 2.5 kHz

Frequency	80 Hz - 20 kHz + 3 dB

Amp Power	80 Watts continuous

Sensitivity	90 dB

Impedence	6 Ohms

Dimensions*	6 7/8” H x 8 1/8” W x 6 3/8” D

Finish	Black or white

	* All measurements include the base /mount assembly.

Phase Technology Corporation 6400 Youngerman Circle Jacksonville, Florida 32244 1.888.PHASE TK www.phasetech.com

ATS-1 specifications

The Phase Technology ATS-1 is a cutting-edge loudspeaker designed for those who seek high-performance audio in both residential and commercial environments. Renowned for its exceptional sound quality and innovative technology, the ATS-1 has garnered attention among audio enthusiasts and professionals alike.

One of the standout features of the ATS-1 is its unique acoustic design. The loudspeaker incorporates a proprietary phased array technology, which enhances audio clarity and spatial imaging. This design allows for a more immersive listening experience, as it creates a wider soundstage and precise localization of sound sources. Whether used in a home theater, music reproduction, or as part of a professional audio setup, the ATS-1 delivers crystal-clear audio across a variety of genres.

The ATS-1 is equipped with a high-performance woofer and a sophisticated tweeter, ensuring a seamless integration of low, mid, and high frequencies. The woofer is designed to provide deep, controlled bass response while the tweeter reproduces the upper frequencies with incredible detail and transparency. This dual-driver configuration allows the ATS-1 to handle a wide dynamic range, making it suitable for both quiet passages and loud, impactful moments.

In addition to its impressive audio performance, the ATS-1 features advanced connectivity options. It is compatible with a range of audio sources, including traditional wired connections and modern wireless protocols. This versatility makes it easy to integrate into various audio systems, providing flexibility for users with different needs.

Durability is another characteristic of the ATS-1. Constructed with high-quality materials and designed to withstand the rigors of daily use, this loudspeaker is built to last. Its elegant design not only enhances its durability but also allows it to blend seamlessly into any environment, making it an aesthetic addition to any space.

Overall, the Phase Technology ATS-1 represents a perfect balance of advanced technology, superior sound quality, and durability. Whether for personal listening or professional audio applications, the ATS-1 stands out as a premier choice for those who demand excellence from their audio equipment. The combination of its innovative features and stylish design ensures that the ATS-1 delivers an unparalleled listening experience that will satisfy even the most discerning audiophiles.